MSR36-40 路由器ACL应用

MSR36-40 路由器ACL应用

配置ACL 2001 

acl number 2001 

 rule 0 permit source 10.55.0.0 0.0.255.255 

 rule 5 permit source 55.13.0.0 0.0.255.255

应用到line vty 0 4 

VTY 0 4 的配置如下：

line vty 0 4

 authentication-mode scheme

 user-role level-15

 user-role network-admin

 protocol inbound ssh

 idle-timeout 5 0

没有:

inbound 也没有packet-filter 

如下：

[CQNA-DFSB2.R1-line-vty0-4]?

Line view commands:

  activation-key       Specify a character to begin a terminal session

  authentication-mode  Login authentication mode

  auto-execute         Automatic execution configuration

  command              Command authorization and accounting

  databits             Set the databits of line

  diagnostic-logfile   Diagnostic log file configuration

  dialer               Specify Dial-on-Demand Routing(DDR) configuration

                       information

  display              Display current system information

  end                  Alias for 'return'

  escape-key           Escape key sequence configuration

  exit                 Alias for 'quit'

  flow-control         Set a flow control mode

  history-command      History command buffer configuration

  idle-timeout         User connection idle timeout

  logfile              Log file configuration

  modem                Specify the modem characteristics

  monitor              System monitor

  no                   Alias for 'undo'

  oam                  Configure OAM parameters

  parity               Set the parity check method

  ping                 Ping function

  protocol             Set the protocols to be supported by the line

  quit                 Exit from current command view

  redirect             Configure Telnet redirect parameters.

  repeat               Repeat executing history commands

  return               Exit to User View

  save                 Save current configuration

  screen-length        Specify the number of lines to be displayed on a screen

  security-logfile     Security log file configuration

  set                  Specify line parameters

  shell                Enable terminal user service

  show                 Alias for 'display'

  speed                Line transmission speed

  stopbit-error        Stop bit error compatibility configuration

  stopbits             Specify the stop bit of line

  terminal             Specify terminal attribute

  tracert              Tracert function

  undo                 Cancel current setting

  user-role            Specify user role configuration information

  write                Alias for 'save'

[CQNA-DFSB2.R1-line-vty0-4]

请问，如何应用到vty 0 4 ?