MSR36-40+OSPF\BGP

一台MSR36-40路由，通过2M线接入对端路由，按接入方式要求，路由只能从OSPF获取，不允许从BGP获取

msr36-40  如何查看路由表是从OSPF 获取的，还是从BGP获取的？

另:bgp下没找到  undo synchronization    命令，应如何调试？

[CQNA-DFSB.R1]bgp 25513

[CQNA-DFSB.R1-bgp]undo  ?

  address-family            Specify an address family

  advertise-rib-active      Advertise the best route in IP routing table

  bestroute                 Change the default best route selection

  confederation             Configure AS confederation parameters

  ebgp-interface-sensitive  Immediately reset session if a link connected peer

                            goes down

  flush                     Flush routes to the RIB

  graceful-restart          Configure Graceful Restart (GR) capability

  group                     Create a peer group

  ignore-first-as           Ignore the first AS number of eBGP route updates

  ip                        Specify IP configuration

  log-peer-change           Log any session status and event change information

  peer                      Specify BGP peers

  primary-path-detect       Enable primary path detect function

  retain                    Configure retain function

  router-id                 Configure router ID

  timer                     Configure timers for BGP

  vpn                       Set forwarding mode of MPLS L3VPN on egress PE

[CQNA-DFSB.R1-bgp]undo