H3C S5130S-10P-HPWR-EI POE口不供电，麻烦各位大神帮忙看看问题在哪里

******************************************************************************** * * * H3C S5130S-10P-HPWR-EI Switch BOOTROM, Version 110 * * * ******************************************************************************** Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. Creation Date : Apr 17 2017, 16:17:22 CPU Clock Speed : 800MHz Memory Size : 512MB Flash Size : 256MB CPLD Version : 001 PCB Version : Ver.A Mac Address : 9ce895571987 Press Ctrl+B to access EXTENDED BOOT MENU...0 Loading the main image files... Loading file flash:/s5130s_ei-cmw710-system-r6113.bin........................... ...........................Done. Loading file flash:/s5130s_ei-cmw710-boot-r6113.bin........Done. Image file flash:/s5130s_ei-cmw710-boot-r6113.bin is self-decompressing......... ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ............................................................................ Done. System is starting... Board checking.......................LSP9LTSUU SDRAM fast selftest........................OK! Flash fast selftest........................OK! CPLD selftest..............................OK! Switch chip selftest.......................OK! PHY selftest...............................OK! Please check leds....................FINISHED! Cryptographic algorithms tests passed. Line aux0 is available. dis poe interface Interface PoE Priority CurPower Oper IEEE Detection (W) Class Status GE1/0/1 Enabled Low 0.0 Off 0 Other Fault GE1/0/2 Enabled Low 0.0 Off 0 Other Fault GE1/0/3 Enabled Low 0.0 Off 0 Other Fault GE1/0/4 Enabled Low 0.0 Off 0 Other Fault GE1/0/5 Enabled Low 0.0 Off 0 Other Fault GE1/0/6 Enabled Low 0.0 Off 0 Other Fault GE1/0/7 Enabled Low 0.0 Off 0 Other Fault GE1/0/8 Enabled Low 0.0 Off 0 Other Fault --- On State Ports: 0; Used: 0.0(W); Remaining: 125.0(W) --- dis poe pse PSE ID : 4 Slot No. : 1 SSlot No. : 0 PSE Model : LSPPSE8A PSE Status : Enabled Power Priority : Low Current Power : 0.0 W Average Power : 0.0 W Peak Power : 0.0 W Max Power : 125.0 W Remaining Guaranteed Power : 125.0 W PSE CPLD Version : - PSE Software Version : 188 PSE Hardware Version : 0 Legacy PD Detection : Disabled Power Utilization Threshold : 80 PD Power Policy : Disabled PD Disconnect-Detection Mode : DC dis poe device Slot 1: PSE ID Slot No. SSlot No. PortNum MaxPower(W) State Model 4 1 0 8 125.0 Off LSPPSE8A