f100-c-g3 nat 设好端口映射后能否定时开启关闭

刚才在防火墙上测试了一下，可以实现，但是在web 页面没有这个功能

#
scheduler job shutdown-nat
command 1 system-view
command 2 interface GigabitEthernet 2/0/0
command 3 nat server protocol tcp global 175.11.1.1 18443 inside 10.10.10.253 443 disable //关闭映射
#
scheduler job undo-shutdown-nat
command 1 system-view
command 2 interface GigabitEthernet 2/0/0
command 3 nat server protocol tcp global 175.11.1.1 18443 inside 10.10.10.253 443 //开启映射
#
scheduler schedule nat
user-role network-operator
user-role network-admin
job shutdown-nat
time repeating at 18:20 //每天18：20 执行
#
scheduler schedule undo-nat
user-role network-operator
user-role network-admin
job undo-shutdown-nat
time repeating at 18:24 //每天18：24 执行

可以，配置定时任务

参考案例

    配置关闭和开启接口的工作任务

# 创建名称为shutdown-GigabitEthernet1/0/1的工作任务并进入Job视图。

[Router] scheduler job shutdown-GigabitEthernet1/0/1

# 为Job分配命令，以进入系统视图。

[Router-job-shutdown-GigabitEthernet1/0/1] command 1 system-view

# 为Job分配命令，以进入GigabitEthernet1/0/1接口视图。

[Router-job-shutdown-GigabitEthernet1/0/1] command 2 interface gigabitethernet 1/0/1

# 为Job分配命令，以执行关闭GigabitEthernet1/0/1接口。

[Router-job-shutdown-GigabitEthernet1/0/1] command 3 shutdown

[Router-job-shutdown-GigabitEthernet1/0/1] quit

# 创建名称为shutdown-GigabitEthernet1/0/2的工作任务并进入Job视图。

[Router] scheduler job shutdown-GigabitEthernet1/0/2

# 为Job分配命令，以进入系统视图。

[Router-job-shutdown-GigabitEthernet1/0/2] command 1 system-view

# 为Job分配命令，以进入GigabitEthernet1/0/2接口视图。

[Router-job-shutdown-GigabitEthernet1/0/2] command 2 interface gigabitethernet 1/0/2

# 为Job分配命令，以执行关闭GigabitEthernet1/0/2接口。

[Router-job-shutdown-GigabitEthernet1/0/2] command 3 shutdown

[Router-job-shutdown-GigabitEthernet1/0/2] quit

# 创建名称为start-GigabitEthernet1/0/1的工作任务并进入Job视图。

[Router] scheduler job start-GigabitEthernet1/0/1

# 为Job分配命令，以进入系统视图。

[Router-job-start-GigabitEthernet1/0/1] command 1 system-view

# 为Job分配命令，以进入GigabitEthernet1/0/1接口视图。

[Router-job-start-GigabitEthernet1/0/1] command 2 interface gigabitethernet 1/0/1

# 为Job分配命令，以执行开启GigabitEthernet1/0/1接口。

[Router-job-start-GigabitEthernet1/0/1] command 3 undo shutdown

[Router-job-start-GigabitEthernet1/0/1] quit

# 创建名称为start-GigabitEthernet1/0/2的工作任务并进入Job视图。

[Router] scheduler job start-GigabitEthernet1/0/2

# 为Job分配命令，以进入系统视图。

[Router-job-start-GigabitEthernet1/0/2] command 1 system-view

# 为Job分配命令，以进入GigabitEthernet1/0/2接口视图。

[Router-job-start-GigabitEthernet1/0/2] command 2 interface gigabitethernet 1/0/2

# 为Job分配命令，以执行开启GigabitEthernet1/0/2接口。

[Router-job-start-GigabitEthernet1/0/2] command 3 undo shutdown

[Router-job-start-GigabitEthernet1/0/2] quit

(2)     配置定时执行任务

# 创建名为connect-host1/host2的Schedule，并进入Schedule视图。

[Router] scheduler schedule connect-host1/host2

# 为Schedule分配名为start-GigabitEthernet1/0/1的job。

[Router-schedule-connect-host1/host2] job start-GigabitEthernet1/0/1

# 为Schedule分配名为start-GigabitEthernet1/0/2的job。

[Router-schedule-connect-host1/host2] job start-GigabitEthernet1/0/2

# 为Schedule配置循环执行的时间，在星期一到星期五的上午8点开启GigabitEthernet1/0/1和GigabitEthernet1/0/2接口。

[Router-schedule-connect-host1/host2] time repeating at 08:00 week-day Mon Tue Wed Thu Fri

[Router-schedule-connect-host1/host2] quit

# 创建名为unconnect-host1/host2的Schedule，并进入Schedule视图。

[Router] scheduler schedule unconnect-host1/host2

# 为Schedule分配名为shutdown-GigabitEthernet1/0/1的job。

[Router-schedule-unconnect-host1/host2] job shutdown-GigabitEthernet1/0/1

# 为Schedule分配名为shutdown-GigabitEthernet1/0/2的job。

[Router-schedule-unconnect-host1/host2] job shutdown-GigabitEthernet1/0/2

# 为Schedule配置循环执行的时间，在星期一到星期五的下午18点关闭GigabitEthernet1/0/1和GigabitEthernet1/0/2接口。

[Router-schedule-unconnect-host1/host2] time repeating at 18:00 week-day Mon Tue Wed Thu Fri

[Router-schedule-unconnect-host1/host2] quit