S7502E-7182

静态路由，track，nqa联动   设置路由优先级

确认下组网吧

如果没有支持nat的设备实现不了。

另外如果交换机部署在出口不做ip转发也没法实现基于ip的检测。

如果不方便透露细节建议拨打400热线沟通下细节吧。

以策略路由配置为例，你参考一下。探测IP地址以及下一跳地址写你实际的地址

track 1 nqa entry admin test1 reaction 1
#
track 2 nqa entry admin test2 reaction 2
#
policy-based-route pbr permit node 5
if-match acl 3001
apply next-hop 10.1.13.1 track 1
#
policy-based-route neiwang permit node 10
if-match acl 3002
apply next-hop 10.1.14.1 track 2
#
nqa entry admin test1
type icmp-echo
destination ip 10.1.35.1
frequency 1000
out interface g1/0/1
reaction 1 checked-element probe-fail threshold-type consecutive 3 action-type trigger-only
#
nqa entry admin test2
type icmp-echo
destination ip 10.1.36.1
frequency 1000
out interface g1/0/2
reaction 2 checked-element probe-fail threshold-type consecutive 3 action-type trigger-only
#
nqa schedule admin test start-time now lifetime forever
nqa schedule admin test1 start-time now lifetime forever