路由器web界面和命令行不一致，且配置动态DNS无法选择端口。

你都是MSR5620的路由器，型号越高，web页面能实现的功能相对越少。我刚好把一个用户的路由器升级到最新版本，换了好几个浏览器，web页面显示的和你一样。通过命令行去配置吧

https://www.h3c.com/cn/d_202202/1549519_30005_0.htm#_Toc95958424

2.8  DDNS典型配置举例

2.8.1  与***.***互通的配置举例

1. 组网需求

·     Router为Internet上的用户提供Web服务，使用的域名为***.***。

·     Router通过DHCP获得IP地址，为保证Router的IP地址变化后，Internet上的用户仍然可以利用域名***.***访问Router，Router通过***.***提供的DDNS服务及时通知DNS服务器更新域名和IP地址的对应关系。

·     DNS服务器的IP地址为1.1.1.1。Router通过该DNS服务器将DDNS服务器的域名***.***解析为IP地址。

2. 组网图

图2-2 与***.***互通配置举例组网图

‌

3. 配置步骤

# 创建名称为***.***的DDNS策略，并进入DDNS策略视图。

<Router> system-view

[Router] ddns policy ***.***

# 为DDNS策略***.***指定DDNS更新请求的URL地址，登录用户名为steven，密码为明文字段nevets。

[Router-ddns-policy-***.***] url http://members.***.***/dyndns/update?system=dyndns&hostname=<h>&myip=<a>

[Router-ddns-policy-***.***] username steven

[Router-ddns-policy-***.***] password simple nevets

# 为DDNS策略***.***指定定时发起更新请求的时间间隔为15分钟。

[Router-ddns-policy-***.***] interval 0 0 15

[Router-ddns-policy-***.***] quit

# 配置DNS服务器的IP地址为1.1.1.1。

[Router] dns server 1.1.1.1

# 在GigabitEthernet1/0/1接口下指定应用DDNS策略***.***，更新域名***.***与接口主IP地址的对应关系，并启动DDNS更新功能。

[Router] interface gigabitethernet 1/0/1

[Router-GigabitEthernet1/0/1] ddns apply policy ***.*** fqdn ***.***

4. 验证配置

配置完成后，Router的接口IP地址变化时，它将通过DDNS服务提供商***.***通知DNS服务器建立域名***.***和新的IP地址的对应关系，从而保证Internet上的用户可以通过域名***.***解析到最新的IP地址，访问Router提供的Web服务。

<MSR5620>dis ll nei li
Chassis ID : * -- -- Nearest nontpmr bridge neighbor
# -- -- Nearest customer bridge neighbor
Default -- -- Nearest bridge neighbor
Local Interface Chassis ID Port ID System Name
GE2/0/2 305f-77e7-7400 GigabitEthernet0/0/24 Core
<MSR5620>dis cu
#
version 7.1.064, Release 0809P33
#
sysname MSR5620
#
telnet server enable
#
track 1 interface Dialer0 protocol ipv4
#
track 2 interface Dialer1 protocol ipv4
#
dialer-group 1 rule ip permit
dialer-group 2 rule ip permit
#
ip load-sharing mode per-flow src-ip global
#
dhcp enable
#
dns server 223.5.5.5
dns server 114.114.114.114
#
lldp global enable
#
password-recovery enable
#
vlan 1
#
policy-based-route pbr permit node 1
if-match acl 3000
apply output-interface Dialer0 track 1
apply output-interface Dialer1 track 2
#
policy-based-route pbr permit node 2
if-match acl 3001
apply output-interface Dialer1 track 2
apply output-interface Dialer0 track 1
#
controller Cellular2/0/0
#
controller Cellular2/0/1
#
interface Dialer0
description g2/0/0
mtu 1492
ppp chap password cipher $c$3$ORaoA0al8GQCEOEOKXyAxvC1Bjv1RCa69QvT
ppp chap user CD89119618
ppp ipcp dns admit-any
ppp ipcp dns request
ppp pap local-user CD89119618 password cipher $c$3$aKoH42c+z/bKC+6459e7+INIeLhW5XJKLwDm
dialer bundle enable
dialer-group 1
dialer timer idle 0
dialer timer autodial 5
ip address ppp-negotiate
tcp mss 1280
nat outbound
#
interface Dialer1
description g2/0/1
mtu 1492
ppp chap password cipher $c$3$bFdebcHCtQ3jyOJJfvvg84MhNealIWxZCWb1
ppp chap user CD89119616
ppp ipcp dns admit-any
ppp ipcp dns request
ppp pap local-user CD89119616 password cipher $c$3$8xbCWu8z0Jq2QU8SPxmfZwDnsDSpvXptwLlK
dialer bundle enable
dialer-group 2
dialer timer idle 0
dialer timer autodial 5
ip address ppp-negotiate
tcp mss 1280
nat outbound
#
interface NULL0
#
interface Vlan-interface1
#
interface GigabitEthernet2/0/0
port link-mode route
combo enable copper
pppoe-client dial-bundle-number 0
#
interface GigabitEthernet2/0/1
port link-mode route
combo enable copper
pppoe-client dial-bundle-number 1
#
interface GigabitEthernet2/0/2
port link-mode route
description To_Core
combo enable copper
ip address 172.31.255.254 255.255.255.0
ip policy-based-route pbr
#
interface M-GigabitEthernet0
#
interface Ten-GigabitEthernet2/0/3
port link-mode route
speed 1000
#
interface Ten-GigabitEthernet2/0/4
port link-mode route
speed 1000
#
scheduler logfile size 16
#
line class console
user-role network-admin
#
line class tty
user-role network-operator
#
line class vty
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 4
authentication-mode scheme
user-role network-operator
#
line vty 5 63
user-role network-operator
#
ip route-static 0.0.0.0 0 Dialer1
ip route-static 0.0.0.0 0 Dialer0
ip route-static 172.20.0.0 22 172.31.255.1
ip route-static 172.31.254.0 24 172.31.255.1
ip route-static 192.168.48.0 22 172.31.255.1
#
snmp-agent
snmp-agent local-engineid 800063A28000DDB69F847300000001
snmp-agent community write private
snmp-agent community read public
snmp-agent sys-info version all
snmp-agent trap enable arp
snmp-agent trap enable ipsec
snmp-agent trap enable radius
snmp-agent trap enable syslog
#
ssh server enable
#
acl advanced 3000
rule 5 permit ip source 192.168.48.0 0.0.3.255
#
acl advanced 3001
rule 5 permit ip source 172.20.0.0 0.0.3.255
rule 10 permit ip source 172.31.254.0 0.0.0.255
rule 15 permit ip source 172.31.255.0 0.0.0.255
#
undo password-control length enable
undo password-control complexity user-name check
#
domain system
#
domain default enable system
#
role name level-0
description Predefined level-0 role
#
role name level-1
description Predefined level-1 role
#
role name level-2
description Predefined level-2 role
#
role name level-3
description Predefined level-3 role
#
role name level-4
description Predefined level-4 role
#
role name level-5
description Predefined level-5 role
#
role name level-6
description Predefined level-6 role
#
role name level-7
description Predefined level-7 role
#
role name level-8
description Predefined level-8 role
#
role name level-9
description Predefined level-9 role
#
role name level-10
description Predefined level-10 role
#
role name level-11
description Predefined level-11 role
#
role name level-12
description Predefined level-12 role
#
role name level-13
description Predefined level-13 role
#
role name level-14
description Predefined level-14 role
#
user-group system
#
local-user adminsc class manage
password hash $h$6$1DAxeHCRYEuWjD0k$oP51K1eCVA2D1R1NfvRFxPZx3kbnypxkiAmFG7XYrIf9x79Jf9l3A1nSlxHU4guLbYbu7pSzKE4jXCmhO77uSw==
service-type ssh telnet terminal http https
authorization-attribute user-role level-15
authorization-attribute user-role network-operator
#
ip http enable
ip https enable
#
cloud-management server domain oasis.h3c.com
#
undo autodeploy url enable
#
return
<MSR5620> dis int brief
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Primary IP Description
Dia0 UP UP 100.64.17.233 g2/0/0
Dia1 UP UP 100.64.55.164 g2/0/1
GE2/0/0 UP UP --
GE2/0/1 UP UP --
GE2/0/2 UP UP 172.31.255.254 To_Core
InLoop0 UP UP(s) --
MGE0 DOWN DOWN --
NULL0 UP UP(s) --
REG0 UP -- --
XGE2/0/3 DOWN DOWN --
XGE2/0/4 DOWN DOWN --
Vlan1 DOWN DOWN --

<MSR5620>dis dev man
Chassis self:
DEVICE_NAME : MSR5620
DEVICE_SERIAL_NUMBER : 210235A1P8P21B000085
MAC_ADDRESS : 642F-C74A-9876
MANUFACTURING_DATE : 2021-11-29
VENDOR_NAME : H3C
PRODUCT ID : RT-MSR5620
Slot 0 CPU 0:
Subslot 0:
DEVICE_NAME : RT-MPU-60
DEVICE_SERIAL_NUMBER : 210231A4B5P21B00007T
MAC_ADDRESS : 00DD-B69F-8473
MANUFACTURING_DATE : 2021-11-16
VENDOR_NAME : H3C
PRODUCT ID : RT-MPU-60
Slot 2 CPU 0:
Subslot 0:
The card does not support manufacture information.
Fan 1:
The operation is not supported on the specified fan.
Power 1:
DEVICE_NAME : AC-PSR300-12A2
DEVICE_SERIAL_NUMBER : 210231A2ERN2190001GR
MAC_ADDRESS : NONE
MANUFACTURING_DATE : 2021-09-10
VENDOR_NAME : H3C
PRODUCT ID : AC-PSR300-12A2
Power 2:
DEVICE_NAME : AC-PSR300-12A2
DEVICE_SERIAL_NUMBER : 210231A2ERN2190001GC
MAC_ADDRESS : NONE
MANUFACTURING_DATE : 2021-09-10
VENDOR_NAME : H3C
PRODUCT ID : AC-PSR300-12A2
<MSR5620>dis version
H3C Comware Software, Version 7.1.064, Release 0809P33
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd. All rights reserved.
H3C MSR5620 uptime is 11 weeks, 0 days, 3 hours, 21 minutes
Last reboot reason : Power on
Boot image: flash:/msr56-cmw710-boot-r0809p33.bin
Boot image version: 7.1.064P80, Release 0809P33
Compiled Nov 20 2020 16:00:00
System image: flash:/msr56-cmw710-system-r0809p33.bin
System image version: 7.1.064, Release 0809P33
Compiled Nov 20 2020 16:00:00
Feature image(s) list:
flash:/msr56-cmw710-security-r0809p33.bin, version: 7.1.064
Compiled Nov 20 2020 16:00:00
flash:/msr56-cmw710-voice-r0809p33.bin, version: 7.1.064
Compiled Nov 20 2020 16:00:00
flash:/msr56-cmw710-data-r0809p33.bin, version: 7.1.064
Compiled Nov 20 2020 16:00:00

Slot 0: MPU-60 uptime is 11 weeks, 0 days, 3 hours, 21 minutes
Last reboot reason : Power on
CPU ID: 0xb
2G bytes DDR3 SDRAM Memory
8M bytes Flash Memory
PCB Version: 3.0
CPLD Version: 1.0
Basic BootWare Version: 2.41
Extended BootWare Version: 2.41
[SUBSLOT 0]CON (Hardware)3.0, (Driver)1.0, (CPLD)1.0
[SUBSLOT 0]MGE0 (Hardware)3.0, (Driver)1.0, (CPLD)1.0

Slot 2: SPU uptime is 11 weeks, 0 days, 3 hours, 19 minutes
Last reboot reason : Power on
CPU ID: 0xd
2G bytes DDR3 SDRAM Memory
8M bytes Flash Memory
PCB Version: 2.0
CPLD Version: 2.0
Basic BootWare Version: 2.20
Extended BootWare Version: 2.20
[SUBSLOT 0]GE2/0/0 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]GE2/0/1 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]GE2/0/2 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]XGE2/0/3 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]XGE2/0/4 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]CELLULAR2/0/0 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]CELLULAR2/0/1 (Hardware)2.0, (Driver)1.0, (CPLD)2.0

<MSR5620>sav f
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.

使用命令行配置，web有问题