[H3C]display current-configuration
#
version 5.20, Release 2514P14
#
sysname H3C
#
domain default enable system
#
dar p2p signature-file flash:/p2p_default.mtd
#
port-security enable
#
undo ip http enable
#
password-recovery enable
#
vlan 1
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
dhcp server ip-pool lan1
network 192.168.11.0 mask 255.255.255.0
gateway-list 192.168.11.1
dns-list 114.114.114.114
#
dhcp server ip-pool vlan1 extended
network ip range 192.168.10.2 192.168.10.254
network mask 255.255.255.0
gateway-list 192.168.10.1
dns-list 222.74.1.200
#
user-group system
group-attribute allow-guest
#
local-user admin
password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof QP5aV
authorization-attribute level 3
service-type telnet
#
cwmp
undo cwmp enable
#
interface Aux0
async mode flow
link-protocol ppp
#
interface Cellular0/0
async mode protocol
link-protocol ppp
#
interface NULL0
#
interface Vlan-interface1
ip address 192.168.10.1 255.255.255.0
dhcp server apply ip-pool vlan1
#
interface GigabitEthernet0/0
port link-mode route
nat outbound
ip address dhcp-alloc
#
interface GigabitEthernet0/1
port link-mode route
#
interface GigabitEthernet0/2
port link-mode bridge
#
interface GigabitEthernet0/3
port link-mode bridge
#
interface GigabitEthernet0/4
port link-mode bridge
#
interface GigabitEthernet0/5
port link-mode bridge
#
interface GigabitEthernet0/6
port link-mode bridge
#
interface GigabitEthernet0/7
port link-mode bridge
#
interface GigabitEthernet0/8
port link-mode bridge
#
interface GigabitEthernet0/9
port link-mode bridge
#
load xml-co