重新提问一下，多vlan上网

听大家的意见，重新规划了网络，办公室一层二层有线网络单独一个vlan，单独一个网段，vlan10 ：192.168.10.0 24，办公室一层和二层的无线网络单独一个vlan，单独一个网络，vlan20 ：192.168.20.0 24，然后在vlan30在交换机9口上，与路由器连接。交换机上启用DHCP分配vlan10和vlan20的地址。大家帮我看看，我配置的对不对啊？

[H3C]vlan 10
[H3C-vlan10]port g1/0/1 to g1/0/2
[H3C-vlan10]q
[H3C]int vlan 10
[H3C-Vlan-interface10]ip add 192.168.10.1 24
[H3C-Vlan-interface10]q

[H3C]vlan 20
[H3C-vlan20]port g1/0/4 to g1/0/5
[H3C-vlan20]q
[H3C]int vlan20
[H3C-Vlan-interface20]ip add 192.168.20.1 24
[H3C-Vlan-interface20]q

[H3C]vlan 30
[H3C-vlan30]port g1/0/9
[H3C-vlan30]int vlan30
[H3C-Vlan-interface30]ip add 192.168.30.1 24
[H3C-Vlan-interface30]q

[H3C]ip route-static 0.0.0.0 0.0.0.0 192.168.30.2(路由器上与交换机连接的接口IP)

[H3C]dhcp server ip-pool vlan10

[H3C-dhcp-pool-vlan10]network 192.168.10.0 mask 255.255.255.0
[H3C-dhcp-pool-vlan10]gateway-list 192.168.10.1
[H3C-dhcp-pool-vlan10]dns-list 202.97.224.68 202.97.224.69
[H3C-dhcp-pool-vlan10]qu
[H3C]dhcp server ip-pool vlan20
[H3C-dhcp-pool-vlan20]network 192.168.20.0 mask 255.255.255.0
[H3C-dhcp-pool-vlan20]gateway-list 192.168.20.1
[H3C-dhcp-pool-vlan20]dns-list 202.97.224.68 202.97.224.69
[H3C-dhcp-pool-vlan20]q
[H3C]dhcp enable

[H3C]int vlan10
[H3C-Vlan-interface10]dhcp select server
[H3C-Vlan-interface10]dhcp server apply ip-pool vlan10
[H3C-Vlan-interface10]q

[H3C]int vlan20
[H3C-Vlan-interface20]dhcp select server
[H3C-Vlan-interface20]dhcp server apply ip-pool vlan20
[H3C-Vlan-interface20]q

这样配置，g1/0/9接口不用trunk吗？也不用设置nat吗？

还有就是，我路由器该怎么配置啊？路由器与交换机连接的接口我配置了ip192.168.30.2 24

然后ge0/2接口是与电信设备连接的，他给的地址是1.1.1.254 /24 网关是1.1.1.1  DNS是8.8.8.8