在核心交换机上配置策略路由后，需要走策略路由的VLAN无法访问内网其他VALN，也无法访问内网网关

由于策略路由大于默认路由，怀疑是所有的数据都走下一跳路由器了，所以内网的数据也没有走内网网关，配置如下，需要怎么改动才能让内网互通，路由器地址是172.16.141.1，配置策略路由的VLAN是172.16.122.0，这个VLAN的内网网关为172.16.122.254，内网其他VLAN为172.16.133.0

[H3C] acl number 3001 

[H3C-acl-adv-3001] rule 0 permit ip source 172.16.122.0 0.0.0.255

[H3C] quit [H3C] traffic classifier 1

[H3C-classifier-1] if-match acl 3001 

[H3C-classifier-1] quit 

[H3C] traffic behavior 1

[H3C-behavior-1] redirect next-hop 172.16.141.1

[H3C-behavior-1] quit

[H3C] qos policy 1

[H3C-qospolicy-1] classifier 1 behavior 1

[H3C-qospolicy-1] quit

[H3C] qos vlan-policy 1 vlan 122 inbound 

[H3C] qos vlan-policy 1 vlan 122 outbound