H3C WA4320-ACN-SI-FIT 用什么工具刷机啊

你要做什么？

瘦切胖的步骤如下，你可以参考一下：

1）         AP瘦切胖

先判断AP当前的工作模式

可以看出当前工作在Fit模式

在命令行下完成胖瘦切换：

a.     在Extend bootware 视图下完成胖瘦切换 ：

在设备上电之后，basic bootware启动成功之后，会弹出 ：

Press Ctrl+B to enter extended boot menu...   此时按下Ctrl+B，命令行进入设备的Extend bootware 界面 。

有的AP有ctrl+Y修改AP模式,可以先修改了.

注：因为AP的flash较小，需要先删除fit的启动文件。

删除完flash中的文件后，进行FAT版本的启动文件的导入：

（也可以直接在命令行下删除.bin文件）

<h3c>delete /unreserved flash:/wa2600a_fit.bin

输入“y”

注：AP的启动文件的名称必须改成和官网上软件版本升级注意事项中相同的名称。

上传软件版本之后，重启设备 。

可以看到，此时设备的boot-loader为wa2600a_fat.bin文件。

b.     通过命令行进行瘦切胖

Press ENTER to get started.

<WAP621>dis version

H3C Comware Platform Software

Comware Software, Version 5.20, Release 1508P06

Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved.

H3C WAP621 uptime is 0 week, 0 day, 0 hour, 0 minute

 CPU type: ATHEROS AR9344

 128M bytes DDR2 SDRAM Memory

 16M bytes Flash Memory

 Pcb             Version:  Ver.A

 Basic  BootROM  Version:  3.05

 Extend BootROM  Version:  3.05

 [SLOT  1]CON           (Hardware)Ver.A,        (Driver)1.0

 [SLOT  1]GE1/0/1       (Hardware)Ver.A,        (Driver)1.0

 [SLOT  1]RADIO1/0/1    (Hardware)Ver.A,        (Driver)1.0

<WAP621>dir

Directory of flash:/

   0     -rw-   7487488  Aug 08 2008 20:00:00   wa2600a_fit.bin

15057 KB total (7742 KB free)

[WAP621]interface v1

[WAP621-Vlan-interface1]ip a 192.168.0.2 24  //配置VLAN 1的虚接口地址，保证和tftp服务器之间网络可达

[WAP621-Vlan-interface1]qui

%Apr 26 12:00:56:458 2000 WAP621 WMSH/6/WMESH_EXIT_ZERO_CFG_STATE:  The device has exited zero configuration state.

[WAP621]qui

<WAP621>delete /unreserved flash:/wa2600a_fit.bin  //删除fit版本的文件，给FAT版本的上传留出足够的空间

The contents cannot be restored!!! Delete flash:/wa2600a_fit.bin?[Y/N]:y

Deleting a file permanently will take a long time. Please wait...

.............................................................................

%Delete file flash:/wa2600a_fit.bin...Done.

<WAP621>tftp 192.168.0.1 get wa2600a_fat.bin

  ..

  File will be transferred in binary mode

  Downloading file from remote TFTP server, please wait................................./

  TFTP: 9090048 bytes received in 64 second(s)

  File downloaded successfully.

<WAP621>boot-loader file flash:/wa2600a_fat.bin //指定系统启动文件

  Verifying boot file ......

  This command will set the boot file. Continue? [Y/N]:y

  The specified file will be used as the boot file at the next reboot on slot 1!

<WAP621>

%Apr 26 12:09:39:318 2000 WAP621 DEVM/5/BOARD_REBOOT: Board is rebooting on Chassis 0 Slot 1.

%Apr 26 12:09:41:418 2000 WAP621 IFNET/3/LINK_UPDOWN: GigabitEthernet1/0/1 link status is DOWN.

%Apr 26 12:09:41:430 2000 WAP621 IFNET/3/LINK_UPDOWN: Vlan-interface1 link status isà

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Starting to get the main application file--flash:/wa2600a_fat.bin!..........

............................................................................

....................................................

The main application file is self-decompressing.............................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

.................................................................Done!

System application is starting...

Startup configuration file does not exist.

User interface con0 is available.

Press ENTER to get started.

<WAP621>dis version

H3C Comware Platform Software

Comware Software, Version 5.20, Release 1308P11

Copyright (c) 2004-2015 Hangzhou H3C Tech. Co., Ltd. All rights reserved.

H3C WAP621 uptime is 0 week, 0 day, 0 hour, 0 minute

 CPU type: ATHEROS AR9344

 128M bytes DDR2 SDRAM Memory

 16M bytes Flash Memory

 Pcb             Version:  Ver.A

 Basic  BootROM  Version:  3.03

 Extend BootROM  Version:  3.03

 [SLOT  1]CON           (Hardware)Ver.A,        (Driver)1.0

 [SLOT  1]GE1/0/1       (Hardware)Ver.A,        (Driver)1.0

 [SLOT  1]RADIO1/0/1    (Hardware)Ver.A,        (Driver)1.0

<WAP621>dis boot-loader

  The current boot app is: flash:/wa2600a_fat.bin

  The app that will boot upon reboot is: flash:/wa2600a_fat.bin

<WAP621>dis in br

The brief information of interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface            Link Protocol Main IP         Description

NULL0                UP   UP(s)    --

Vlan1                UP   UP       192.168.0.50

WLAN-Radio1/0/1      UP   UP       --

The brief information of interface(s) under bridge mode:

Link: ADM - administratively down; Stby - standby

Speed or Duplex: (a)/A - auto; H - half; F - full

Type: A - access; T - trunk; H - hybrid

Interface            Link Speed   Duplex Type PVID Description

GE1/0/1              UP   100M(a) F(a)   A    1

WLAN-BSS32           DOWN --      --     H    1

可以看到，此时瘦切胖已经成功了

C.搭建TFTP服务器，进行瘦切胖

切换为胖模式