msr 26-00-10路由在reset之后,想登录WEB页面调整,本机也更改IP192.168.1.2,子网掩码255.255.255.0,网关输入的192.168.1.1,浏览器上输入的192.168.1.1 网页出错了没有反应,是哪里的问题?
(0)
最佳答案
首先准备一条console线,然后终端使用xshell、CRT或者超级终端等工具,使用命令行登陆。console口登陆后,可以使用所有的命令,例如使用console线配置web登陆命令:
ip http enable
local-user admin
password simpe admin
service-type web
authorization-attribute level3
user-interface vty 0 4
authentication-mode scheme
interface vlan 1
ip address 192.168.1.1 24
配置完成后,使用网线接到2600的任意一个lan口上,电脑配置 192.168.1.2,255.255.255.0,192.168.1.1的IP地址 ,使用浏览器输入:http://192.168.1.1 ,用户名密码输入admin/admin后就可以使用web登陆了。
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
根据你给的命令我输入之后,显示错误 % Unrecognized command found at '^' position
ip http enable local-user admin password simpe admin service-type web authorization-attribute level3 quit user-interface vty 0 4 authentication-mode scheme quit interface vlan 1 ip address 192.168.1.1 24