交换机提示
%Jan 1 00:04:07:801 2013 G4-HJ-03 DEV/1/FAN_DIRECTION_NOT_PREFERRED: Fan 1 airflow direction is not preferred on slot 1, please check it.
%Jan 1 00:04:07:803 2013 G4-HJ-03 DEV/1/FAN_DIRECTION_NOT_PREFERRED: Fan 2 airflow direction is not preferred on slot 1, please check it.
sys指示灯红色 风扇灯橙色闪动 需要如何修正
(0)
1、先display fan,查看下风扇当前风向是port to power 还是power to port
2、fan prefer solt xxx (改成和1中查看到的相反方向就行)
(0)
风扇风向不对,更改一下风向
dis fan 看一下风向情况,修改成一致。
修改风向:
(0)
%Jan 1 00:05:51:816 2013 G4-lhjc-1/3 DEV/2/TEMPERATURE_SHUTDOWN: Temperature is greater than the high-temperature shutdown threshold on slot 1 sensor hotspot 3. The slot will be powered off automatically.
这个问题要怎么修正呀
---------------------------------------------------------------------- Slot Sensor Temperature Lower Warning Alarm Shutdown 1 hotspot 1 40 0 84 98 105 1 hotspot 2 33 0 100 110 NA 1 hotspot 3 -- 0 110 130 137
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
[G4-HJ-03]dis fan Slot 1: Fan 1: State : FanDirectionFault Airflow Direction: Power-to-port Prefer Airflow Direction: Port-to-power Fan 2: State : FanDirectionFault Airflow Direction: Power-to-port Prefer Airflow Direction: Port-to-power
见图
已经更改过来了
%Jan 1 00:05:51:816 2013 G4-lhjc-1/3 DEV/2/TEMPERATURE_SHUTDOWN: Temperature is greater than the high-temperature shutdown threshold on slot 1 sensor hotspot 3. The slot will be powered off automatically.
这个提示要怎么修正呀
温度过高报警,可能你刚才风向改的还是不对,建议再换一次风向,(两个风扇必须改成同一个风向)
这个是另外一台 5130-10p-hpwr
我查看了下风扇 显示 Slot 1: Fan-less
而且我摸了下设备 并不发热
。。。风扇最好把两个风扇槽插满
这个设备没有风扇槽位