开机就来到这个界面了 没有办法用端口 。官网上可以利用tftp-xmodem两种方式上传 有没有详细的上传教程 。 H3C S2626-PWR BootWare, Version 1.10 *
* *
****************************************************************************
Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Jun 5 2014 11:34:07
CPU Type : MIPS4kec
CPU L1 Cache : 16KB
CPU Clock Speed : 500MHz
Memory Type : DDR3 SDRAM
Memory Size : 128MB
Memory Speed : 300MHz
BootWare Size : 3MB
Flash Size : 32MB
BootWare Validating...
Application program does not exist.
BootWare password: Not required. Please press Enter to continue.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================
(0)
供参考
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 2
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5): 5
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5): 5
Baudrate has been changed to 115200 bps.
#切换CRT的波特率为115200,重新连接
The current baudrate is 115200 bps
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default) |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200* |
|<0> Exit |
============================================================================
Enter your choice(0-5): 0
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5): 2
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCCC
#在CRT软件中的“传输--发送Xmodem”,选择.ipe文件
正在开始 xmodem 传输。 按 Ctrl+C 取消。
正在传输 MSR36-CMW710-R0106P18.IPE...
正在传输 MSR36-CMW710-R0106P18.IPE...
正在传输 MSR36-CMW710-R0106P18.IPE...
正在传输 MSR36-CMW710-R0106P18.IPE...
正在传输 MSR36-CMW710-R0106P18.IPE...
100% 60289 KB 4 KB/s 04:03:40 0 错误
Download successfully!
62035968 bytes downloaded!
Image file msr36-cmw710-boot-r0106.bin is self-decompressing...
Input the File Name:msr36-cmw710-boot-r0106.bin //输入文件名(默认的,才能识别)
Saving file cfa0:/msr36-cmw710-boot-r0106.bin ..............................
....Done.
Image file msr36-cmw710-system-r0106.bin is self-decompressing...
Input the File Name:msr36-cmw710-system-r0106.bin //输入文件名
Saving file cfa0:/msr36-cmw710-system-r0106.bin ..............................
.....Done.
Image file msr36-cmw710-security-r0106.bin is self-decompressing...
Input the File Name:msr36-cmw710-security-r0106.bin //输入文件名
Saving file cfa0:/msr36-cmw710-security-r0106.bin ..........................
....Done.
Image file msr36-cmw710-voice-r0106.bin is self-decompressing...
Input the File Name:msr36-cmw710-voice-r0106.bin //输入文件名
Saving file cfa0:/msr36-cmw710-voice-r0106.bin .............................
.....Done.
Image file msr36-cmw710-data-r0106.bin is self-decompressing...
Input the File Name:msr36-cmw710-data-r0106.bin //输入文件名
Saving file cfa0:/msr36-cmw710-data-r0106.bin ..............................
......Done.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5): 0
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 0
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Press Ctrl+T to start heavy memory test
Do you want to check SDRAM? [Y/N]
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C MSR36-20 BootWare, Version 1.42 *
* *
****************************************************************************
Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.
System image is starting...
Startup configuration file does not exist.
Performing automatic configuration... Press CTRL_D to break.
Automatic configuration attempt: 1.
Not ready for automatic configuration: no interface available.
Waiting for the next...
Automatic configuration is running, press CTRL_D to break.
Automatic configuration is running, press CTRL_D to break.
Automatic configuration is running, press CTRL_D to break.
#输入Ctrl+D
Automatic configuration is aborted.
Line aux0 is available.
Press ENTER to get started.
<H3C>
<H3C>%Jan 2 18:08:50:299 2015 H3C SHELL/5/SHELL_LOGIN: TTY logged in from aux0.
(1)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论