通过web页面恢复出厂设置,重启之后一直停留在
****************************************************************************
* *
* BootWare, Version 1.03 *
* *
****************************************************************************
Compiled Date : Mar 11 2022
Memory Type : DDR4 SDRAM
Memory Size : 2GB
PCB Version : Ver.C
BootWare Validating...
Image program does not exist.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
选择5提示Password recovery capability is enabled. To perform this operation, first disable the password recovery capability using the undo password-recovery enable command in CLI.
不知道是什么原因,选择6也是重启之后返回这个擦菜单,有没有高手告诉下应该怎么搞?