如何获取VPN用户接入的MAC地址

[FGF1000SG2]dis interface sslvpn-ac0 SSLVPN-AC0 Current state: UP Line protocol state: UP Description: SSLVPN-AC0 Interface Bandwidth: 64 kbps Maximum transmission unit: 1500 Internet address: 192.168.89.1/24 (primary) Link layer protocol is SSLVPN Last clearing of counters: Never Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec Input: 8228 packets, 743370 bytes, 0 drops Output: 8282 packets, 10560217 bytes, 0 drops 有H3C的命令吗

[FGF1000SG2-SSLVPN-AC0]dis mac-address dynamic MAC Address VLAN ID State Port/NickName Aging

无任何信息显示的

H3C设备也提供了类似的命令来查看SSL VPN接口信息。可以使用以下命令来查看FGF1000SG2设备的SSL VPN接口状态： display ssl-vpn interface SSLVPN-AC0 该命令会显示出SSLVPN-AC0接口的详细信息，包括接口状态、带宽、MTU、IP地址、数据包流量等

这命令不行的，而且我要查MAC，查接口状态、带宽、MTU、IP地址、数据包流量没用的

执行以下命令，进入VPN实例视图：vpn-instance vpn-instance-name 其中，vpn-instance-name为您要查看的VPN实例名称。 执行以下命令，查看VPN实例中的接口和MAC地址： display mac-address vpn-instance vpn-instance-name 执行命令后，会显示VPN实例中所有接口的MAC地址信息，包括接口名称、MAC地址、VLAN ID等。 需要注意的是，以上命令是查看VPN实例中的MAC地址，如果您想查看某个特定VPN用户的MAC地址，需要先确认其所连接的接口名称，再使用以下命令查看该接口的MAC地址： display mac-address interface interface-name 其中，interface-name为该VPN用户连接的接口名称。

[FGF1000SG2-SSLVPN-AC0]dis mac-address ? > Redirect it to a file >> Redirect it to a file in append mode H-H-H MAC address aging-time Global aging time blackhole Blackhole entry, without aging, can be added/deleted, saved to the configuration file count MAC entries count dynamic Dynamic entry, with aging, can be added/deleted, lost after reset interface Choose one interface to display mac-learning Hardware MAC address learning multicast Multicast entry, without aging, can be added/deleted, saved to the configuration file multiport Multiport entry, without aging, can be added/deleted, saved to the configuration file static Static entry, without aging, can be added/deleted, saved to the configuration file vlan VLAN | Matching output <cr>

display mac-address后面没有vpn-instance这一命令项