我在交换机上配置了mirroring-group 1 reflector-port gigabitethernet 1/0/6 mirroring-group 1 mirroring-port ten1/1/0/1 both
而配置远程镜像VLAN mirroring-group 1 remote-probe vlan 10 就会报错
Make sure the VLAN has not been used for any other purpose. Mirrored packets will be broadcast within the VLAN after the configuration. Continue? [Y/N]: Before pressing ENTER you must choose 'YES' or 'NO'[Y/N]:y
Mirroring setting failed.
配置了远程镜像VLAN mirroring-group 1 mirroring-port ten1/1/0/1 both. mirroring-group 1 remote-probe vlan 10 再配置mirroring-group 1 reflector-port gigabitethernet 1/0/6 镜像组1的反射口报错
This operation may delete all settings made on the interface. Continue? [Y/N]: y
Mirroring setting failed.
如果先配置了mirroring-group 1 remote-probe vlan 10 mirroring-group 1 reflector-port gigabitethernet 1/0/6 在配置mirroring-group 1 mirroring-port ten1/1/0/1 both 就报错
很奇怪 只能调用两个 只要配置第三个就报做失败
请问下这是什么原因?
我是按照如下是官网案例来配置的
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
检查过了 没有调用那个镜像用的vlan