acg1000

acg1000-t 无法启动，console口显示下列信息：

eading data: |....................| 100%

84457168 bytes read

argv[2]: quiet

argv[3]: cOnsole=ttyS0,9600

argv[4]: numcores=2

Allocating memory for ELF segment: addr: 0xffffffff80100000 (adjusted to: 0x100000), size

0x52e0400

## Loading big-endian Linux kernel with entry point: 0xffffffff80725cc0 ...

Bootloader: Done loading app on coremask: 0x3

Starting cores 0x3

/sbin/rc starting

Mounting file systems

Setting up loopback

fsck.fat 3.0.26 (2014-03-07)

Starting check/repair pass.

Starting verification pass.

/dev/sdb1: 198 files, 11525/61879 clusters

log disk part is sda1.

[  329.997099] INFO: task sync:1276 blocked for more than 120 seconds.

[  330.072218] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.

[  330.166292] Kernel panic - not syncing: hung_task: blocked tasks

*** NMI Watchdog interrupt on Core 0x01 ***

        $0      0x0000000000000000      at      0x0000000010001ce0

        v0      0xffffffff809c0000      v1      0x0000000000000000

        a0      0xffffffff852672f0      a1      0x0000000000000001

        a2      0x0000000000000000      a3      0x51aac17658000000

        a4      0x00000051aac17658      a5      0x3030306439333031

        a6      0x202843617669756d      a7      0x204f6374656f6e20

        t0      0x0000000000000003      t1      0xffffffff8526d868

        t2      0xffffffff85360000      t3      0x0000000000000000

        s0      0xffffffff8094f4b8      s1      0xffffffff808aeae8

        s2      0x0000000000000130      s3      0x00000000ee6b2800

        s4      0x800000008e2579a0      s5      0x7fffffffffffffff

        s6      0x0000000000000004      s7      0x0000000000000001

        t8      0x0000000000000048      t9      0x0000000000000001

        k0      0x0000000000000000      k1      0x0f000000022699c7

        gp      0x800000008e254000      sp      0x800000008e257750

        s8      0x0000003d77a052dc      ra      0xffffffff80728dfc

        err_epc 0xffffffff801950e0      epc     0xffffffff801e44c8

        status  0x0000000010481ce4      cause   0x0000000040808808

        sum0    0x0000000000000000      en0     0x0000000000000000

*** Chip soft reset soon ***

-Boot 2011.03 (Release Version: V3.2.1) (Build time: Jul 22 2014 - 10:22:58)

Skipping PCIe port 0 BIST, reset not done. (port not configured)

Skipping PCIe port 1 BIST, reset not done. (port not configured)

BIST check passed.

Warning: Clock descriptor tuple not found in eeprom, using defaults

Warning: Board descriptor tuple not found in eeprom, using defaults

CUST_MC6100 board revision major:1, minor:0, serial #: mc6100

OCTEON CN6120-AAP pass 1.1, Core clock: 800 MHz, IO clock: 600 MHz, DDR clock: 533 MHz

(1066 Mhz DDR)

Base DRAM address used by u-boot: 0x0f800000, size: 0x7fdb80

DRAM: 2 GiB

Now running in RAM - U-Boot at: ffffffffc0000000

Clearing DRAM...... done

Registered IDE device 0 from IDE bus:dev 0:0

Flash: 4 MiB

PCIe: Port 0 is SGMII, skipping.

PCIe: Port 1 link active, 1 lanes, speed gen1

PCI console init succeeded, 1 consoles, 1024 bytes each

Net:   octmgmt0, octmgmt1, octeth0, octeth1, octeth2, octeth3, octeth4, octeth5, octeth6,

octeth7

Bus 0: OK

  Device 0: Model: SMI MODEL Firm: 20111006 Ser#: 20090410    000003DD

            Type: Removable Hard Disk

            Capacity: 967.6 MB = 0.9 GB (1981728 x 512)

SATA#0

        (No RDY)

SATA#1

        (3.0 Gbps)

USB:   USB EHCI 1.00

scanning bus for devices... 1 USB Device(s) found

Type the command 'usb start' to scan for USB storage devices.

Press Ctrl+C to enter menuboot:  0

reading vmlinux.64

还有救吗？

acg1000