感觉IPSEC的感兴趣流不唯一,那么加密后的流量完全一样,无法区分
先修改感兴趣流唯一,单独创建一条测试ACL的明细规则,32位掩码,让其重新协商出一条IPSEC SA
然后display ipsec sa查看tunnel-id
再通过以下命令查看统计,查看统计前先清除一下计数
<F1070>reset ipsec statistics tunnel-id XXX
<PA-IDC-SZ-BRANCH-VPN-196-AB>dis ipsec statistics tunnel-id XXX
IPsec packet statistics:
Received/sent packets: 0/0
Received/sent bytes: 0/0
Dropped packets (received/sent): 0/0
Dropped packets statistics
No available SA: 0
Wrong SA: 0
Invalid length: 0
Authentication failure: 0
Encapsulation failure: 0
Decapsulation failure: 0
Replayed packets: 0
ACL check failure: 0
MTU check failure: 0
Loopback limit exceeded: 0
Crypto speed limit exceeded: 0
刚刚配置好的时候都正常的,重启了下防火墙就不行了...隧道信息一直都正常