MSR5600 + WS5800 +POE交换机 +M60 +WX61 M60纯AC模式无法上网》WS5800配置网关和DHCP服务器。
路由器拨号:拨号账号:02867670680 密码:340178 |
# |
dialer-group 10 rule ip permit |
# |
interface Dialer 10 |
ip address ppp-negotiate |
dialer bundle enable |
dialer-group 10 |
ppp chap user 02867670680 |
ppp chap password simple 340178 |
ppp pap local-user 02867670680 password cipher 340178 |
dialer time idle 0 |
tcp mss 1280 |
nat outbound 3000 |
# |
acl advanced 3000 |
rule 50 permit ip |
# |
interface GigabitEthernet0/0/0 |
port link-mode route |
combo enable copper |
pppoe-client dial-bundle-number 2 |
# |
vlan 5 |
name sw-manage |
# |
interface Vlan-interface5 |
ip address 10.1.1.2 255.255.255.0 |
# |
ip route-static 172.16.0.1 16 10.1.1.3 |
ip route-static 0.0.0.0 0 Dialer10 |
# |
interface GigabitEthernet0/0/8 |
port link-mode bridge |
description UPTO-WS5800 |
port link-type access vlan 5 |
# |
核心交换机WS5800 |
# |
vlan 5 |
name sw-manage |
# |
vlan 30 |
name user |
# |
vlan 20 |
name wriless |
# |
interface Vlan-interface5 |
ip address 10.1.1.3 255.255.252.0 |
# |
interface Vlan-interface20 |
ip address 172.16.0.1 255.255.0.0 |
# |
interface Vlan-interface30 |
ip address 172.17.0.1 255.255.0.0 |
# |
ip route-static 0.0.0.0 0 10.1.1.2 |
# |
interface GigabitEthernet0/0/24 |
port link-mode bridge |
description UPTO-LYQ |
port link-type access vlan 5 |
# |
dhcp server ip-pool vlan20 |
gateway-list 172.16.0.0 |
network 172.16.0.0 mask 255.255.0.0 |
dns-list 192.168.2.210 223.5.5.5 |
fib 172.16.0.2 |
# |
dhcp server ip-pool vlan30 |
gateway-list 172.17.0.0 |
network 172.17.0.0 mask 255.255.0.0 |
dns-list 192.168.2.210 223.5.5.5 |
# |
interface GigabitEthernet0/0/23 |
port link-mode bridge |
port link-type trunk |
description UPTO-M60 |
port trunk permit vlan all |
# |
interface GigabitEthernet0/0/22 |
port link-mode bridge |
port link-type trunk |
port link-type pvia vlan 20 |
description UPTO-AP-POEJHJ |
port trunk permit vlan all |
# |
M60(AC管理器) 纯AC模式 |
配置1:新增vlan 5 地址 ip address 10.1.1.4 255.255.255.0 |
配置2:新增vlan 20 地址 ip address 172.16.0.2 255.255.0.0 |
配置3:Lan1 设置trunk 允许所有VLAN 通过。 LAN 1 接核心交换机24口。 |
配置4:添加路由: ip route-static 0.0.0.0 0 10.1.1.2 |
配置5:WIFI模板上,桥接VLAN VLAN 20 |
配置6:AP管理地址:10.1.2.2 |
AP-POE交换机配置 |
# |
interface GigabitEthernet0/0/24 |
port link-mode bridge |
port link-type trunk |
dhcp snnoping trust |
description UPTO-WS5800 |
port trunk permit vlan all |
# |
interface GigabitEthernet0/0/1-22口 |
port link-mode bridge |
port link-type trunk |
port link-type pvia vlan 20 |
description UPTO-AP |
port trunk permit vlan all |
# |
(0)
最佳答案
pppoe-client dial-bundle-number 2///这个Dialer bundle的序号number需要与Dialer接口的编号相同
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论