问

WA2620i-AGN在fit模式如何连接到AC

2023-10-16提问

0关注
0收藏，605浏览

zhiliao_OzPVCJ

zhiliao_OzPVCJ 零段

粉丝：0人关注：0人

问题描述：

AP之前有用，现在无信号，开机闪烁绿灯一分钟左右，然后红灯闪烁

组网及组网描述：

最佳答案

已采纳

zhiliao_sEUyB

zhiliao_sEUyB 九段

粉丝：103人关注：8人

看下ac提示什么，console接ap看下获取到地址了吗

在AC里IP地址为-NA-，状态为空闲

zhiliao_OzPVCJ 发表时间：2023-10-16

console接ap看下过程吧

zhiliao_sEUyB 发表时间：2023-10-16

Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd. Compiled Date : Sep 15 2014 CPU Type : AR9350 CPU L1 Cache : 32KB CPU Clock Speed : 560MHz Memory Type : SDRAM Memory Size : 128MB Memory Speed : 480MHz BootWare Size : 512KB Flash Size : 32MB CPLD Version : 004 PCB Version : Ver.E BootWare Validating... Press Ctrl+B to enter extended boot menu... Starting to get the main application file--flash:/wa2600a_fit.bin!.......... ............................................................................ ........................ The main application file is self-decompressing............................. ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ........................................................Done! System application is starting... Startup configuration file does not exist. User interface con0 is available. Press ENTER to get started.

zhiliao_OzPVCJ 发表时间：2023-10-16

启动起来了，看下vlan1 能获取到地址吗

zhiliao_sEUyB 发表时间：2023-10-16

请问怎么看呢

zhiliao_OzPVCJ 发表时间：2023-10-16

dis ip int brief

zhiliao_sEUyB 发表时间：2023-10-16

回复zhiliao_sEUyB:

*down: administratively down (s): spoofing (l): loopback Interface Physical Protocol IP Address Description Vlan1 down down -- --

zhiliao_OzPVCJ 发表时间：2023-10-16

down的，检查下网线吧，网不通

zhiliao_sEUyB 发表时间：2023-10-16

回复zhiliao_sEUyB:

*down: administratively down (s): spoofing (l): loopback Interface Physical Protocol IP Address Description Vlan1 up up -- --

zhiliao_OzPVCJ 发表时间：2023-10-16

检查下网络问题，得能获取地址和ac通，

zhiliao_sEUyB 发表时间：2023-10-16

回复zhiliao_sEUyB:

%Apr 26 12:00:16:280 2000 WA2620i-AGN IFNET/3/LINK_UPDOWN: GigabitEthernet1/0/1 link status is UP. %Apr 26 12:00:16:286 2000 WA2620i-AGN IFNET/3/LINK_UPDOWN: Vlan-interface1 link status is UP. %Apr 26 12:00:16:286 2000 WA2620i-AGN IFNET/5/LINEPROTO_UPDOWN: Line protocol on the interface Vlan-interface1 is UP.ip %Apr 26 12:00:16:980 2000 WA2620i-AGN LLDP/6/LLDP_CREATE_NEIGHBOR: New neighbor created on Port GigabitEthernet1/0/1 (IfIndex 9437184), Chassis ID is 50da-00b1-d8af, Port ID is GigabitEthernet1/0/9. %Apr 26 12:00:52:608 2000 WA2620i-AGN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state. %Apr 26 12:00:57:610 2000 WA2620i-AGN WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state.

zhiliao_OzPVCJ 发表时间：2023-10-31

回复zhiliao_sEUyB:

获取到IP后又没了

zhiliao_OzPVCJ 发表时间：2023-10-31