MSR3610-X1能检测到AP,但无法正常上网。
MSR3610-X1做为主路由,使用三层接口与核心交换机S5500连接,WA5530-SI连接在楼层交换机。设备管理使用VLAN1的地址管理,AP管理地址也使用VLAN1,业务WIFI计划使用VLAN110和VLAN120,但多次配置都无法正常上网。在H查阅了很多H3C官方文档,里面资料都是要MSR路由添加VLAN的方式,但MSR3610不支持这种模式吧?
(0)
最佳答案
你这个是三层组网了,你得在核心上的dhcp option 43 了 指向路由器
(0)
核心上已经指向了路由器
看到AP上线了。在交换机上查了一下,DHCP尝试分配VLAN1的IP地址没有分配业务VLAN地址,同时终端也无法正常获取到VLAN1的地址
<MSR>di cu # version 7.1.064, Release 6728P26 # sysname ICG3000F-DP # clock timezone Beijing add 08:00:00 clock protocol ntp # wlan global-configuration # telnet server enable # undo resource-monitor output syslog snmp-notification netconf-event # security-zone intra-zone default permit # security-policy disable # dialer-group 3 rule ip permit # dhcp enable dhcp server always-broadcast # dns proxy enable dns server 202.96.128.86 dns server 223.5.5.5 # lldp global enable # system-working-mode standard password-recovery enable # vlan 1 # dhcp server ip-pool lan1 gateway-list 172.16.100.1 network 172.16.100.0 mask 255.255.255.0 address range 172.16.100.10 172.16.100.100 dns-list 223.5.5.5 # # wlan service-template 168 ssid 168 client association-location ap client forwarding-location ap service-template enable # wlan service-template guest ssid Guest client forwarding-location ap service-template enable # controller Cellular0/0 # interface Dialer2 mtu 1492 ppp chap password cipher # interface NULL0 # interface GigabitEthernet0/0 port link-mode route description LAN-interface ip address 10.10.0.1 255.255.255.0 tcp mss 1280 undo dhcp select server ip subscriber l2-connected enable ip subscriber initiator dhcp enable ip subscriber initiator unclassified-ip enable ip subscriber dhcp domain ipoeenabledomain ip subscriber unclassified-ip domain ipoeenabledomain # interface GigabitEthernet0/1 port link-mode route # interface GigabitEthernet0/2 port link-mode route description Single_Line1 combo enable copper pppoe-client dial-bundle-number 2 # interface GigabitEthernet0/3 port link-mode route combo enable copper # interface GigabitEthernet0/4 port link-mode route # interface GigabitEthernet0/5 port link-mode route # object-policy ip Any-Any rule 65533 inspect 8048_url_profile_global rule 65534 pass # security-zone name Local # security-zone name Trust import interface GigabitEthernet0/0 # security-zone name DMZ # security-zone name Untrust import interface Dialer2 # security-zone name Management # zone-pair security source Any destination Any object-policy apply ip Any-Any # zone-pair security source Local destination Trust packet-filter name SWXWSGL # zone-pair security source Local destination Untrust packet-filter name SWXWSGL # zone-pair security source Trust destination Local packet-filter name SWXWSGL # zone-pair security source Untrust destination Local packet-filter name SWXWSGL # scheduler logfile size 16 # line class console user-role network-admin # line class tty user-role network-operator # line class vty user-role network-operator # line con 0 user-role network-admin # line vty 0 63 authentication-mode scheme user-role network-operator idle-timeout 30 0 # ip route-static 0.0.0.0 0 Dialer2 ip route-static 10.10.0.0 20 10.10.0.2 # info-center format unicom info-center loghost 127.0.0.1 port 3301 info-center loghost oasislog.h3c.com info-center source default loghost level notification info-center source CFGLOG loghost level informational # performance-management # ntp-service enable ntp-service unicast-server ***.*** # acl advanced name SWXWSGL rule 1 permit ip # password-control enable undo password-control aging enable undo password-control history enable password-control length 6 password-control login-attempt 3 exceed lock-time 10 password-control update-interval 0 password-control login idle-time 0 # domain ipoeenabledomain authorization-attribute idle-cut 5 1 authentication ipoe none authorization ipoe none accounting ipoe none # domain system # domain default enable system # role name level-0 description Predefined level-0 role # role name level-1 description Predefined level-1 role # role name level-2 description Predefined level-2 role # role name level-3 description Predefined level-3 role # role name level-4 description Predefined level-4 role # role name level-5 description Predefined level-5 role # role name level-6 description Predefined level-6 role # role name level-7 description Predefined level-7 role # role name level-8 description Predefined level-8 role # role name level-9 description Predefined level-9 role # role name level-10 description Predefined level-10 role # role name level-11 description Predefined level-11 role # role name level-12 description Predefined level-12 role # role name level-13 description Predefined level-13 role # role name level-14 description Predefined level-14 role # user-group system # local-user admin class manage service-type telnet http https authorization-attribute user-role network-admin # security-enhanced level 2 # session statistics enable # # url-filter policy 8048_url_profile_global default-action permit # url-filter category custom severity 65535 # app-profile 8048_url_profile_global url-filter apply policy 8048_url_profile_global # wlan ap-group default-group vlan 1 provision ac ip 10.10.0.1 dns server ip 10.10.0.2 # wlan ap 4F-AP model WA5530-SI serial-id 219801A1BW8216E0005H map-configuration flash:/portal_pageinfo.txt provision auto-recovery enable provision auto-update enable vlan 1 radio 1 radio enable service-template 168 vlan 110 radio 2 radio enable service-template 168 vlan 110 radio 3 radio enable service-template guest vlan 120 provision ac ip 10.10.0.1 dns server ip 10.10.0.2 ac host-name MSR36 ip address 10.10.0.110 255.255.255.0 gateway ip 10.10.0.1 module 1 module 2 module 3 module 4 module 5 module 6 module 7 module 8 module 9 module 10 module 11 module 12 module 13 module 14 module 15 module 16 gigabitethernet 1 gigabitethernet 2 # traffic-policy rule 1 name web_AppTraffRank application app http rule 2 name OasisPolicyRule action qos profile oasisprofile application app http profile name oasisprofile # dac log-collect service dpi traffic enable dac traffic-statistic application enable # dac storage service dpi traffic limit hold-time 1 dac storage service traffic limit hold-time 1 # cloud-management server domain # return
<MSR>di cu # version 7.1.064, Release 6728P26 # sysname ICG3000F-DP # clock timezone Beijing add 08:00:00 clock protocol ntp # wlan global-configuration # telnet server enable # undo resource-monitor output syslog snmp-notification netconf-event # security-zone intra-zone default permit # security-policy disable # dialer-group 3 rule ip permit # dhcp enable dhcp server always-broadcast # dns proxy enable dns server 202.96.128.86 dns server 223.5.5.5 # lldp global enable # system-working-mode standard password-recovery enable # vlan 1 # dhcp server ip-pool lan1 gateway-list 172.16.100.1 network 172.16.100.0 mask 255.255.255.0 address range 172.16.100.10 172.16.100.100 dns-list 223.5.5.5 # # wlan service-template 168 ssid 168 client association-location ap client forwarding-location ap service-template enable # wlan service-template guest ssid Guest client forwarding-location ap service-template enable # controller Cellular0/0 # interface Dialer2 mtu 1492 ppp chap password cipher # interface NULL0 # interface GigabitEthernet0/0 port link-mode route description LAN-interface ip address 10.10.0.1 255.255.255.0 tcp mss 1280 undo dhcp select server ip subscriber l2-connected enable ip subscriber initiator dhcp enable ip subscriber initiator unclassified-ip enable ip subscriber dhcp domain ipoeenabledomain ip subscriber unclassified-ip domain ipoeenabledomain # interface GigabitEthernet0/1 port link-mode route # interface GigabitEthernet0/2 port link-mode route description Single_Line1 combo enable copper pppoe-client dial-bundle-number 2 # interface GigabitEthernet0/3 port link-mode route combo enable copper # interface GigabitEthernet0/4 port link-mode route # interface GigabitEthernet0/5 port link-mode route # object-policy ip Any-Any rule 65533 inspect 8048_url_profile_global rule 65534 pass # security-zone name Local # security-zone name Trust import interface GigabitEthernet0/0 # security-zone name DMZ # security-zone name Untrust import interface Dialer2 # security-zone name Management # zone-pair security source Any destination Any object-policy apply ip Any-Any # zone-pair security source Local destination Trust packet-filter name SWXWSGL # zone-pair security source Local destination Untrust packet-filter name SWXWSGL # zone-pair security source Trust destination Local packet-filter name SWXWSGL # zone-pair security source Untrust destination Local packet-filter name SWXWSGL # scheduler logfile size 16 # line class console user-role network-admin # line class tty user-role network-operator # line class vty user-role network-operator # line con 0 user-role network-admin # line vty 0 63 authentication-mode scheme user-role network-operator idle-timeout 30 0 # ip route-static 0.0.0.0 0 Dialer2 ip route-static 10.10.0.0 20 10.10.0.2 # info-center format unicom info-center loghost 127.0.0.1 port 3301 info-center loghost oasislog.h3c.com info-center source default loghost level notification info-center source CFGLOG loghost level informational # performance-management # ntp-service enable ntp-service unicast-server ***.*** # acl advanced name SWXWSGL rule 1 permit ip # password-control enable undo password-control aging enable undo password-control history enable password-control length 6 password-control login-attempt 3 exceed lock-time 10 password-control update-interval 0 password-control login idle-time 0 # domain ipoeenabledomain authorization-attribute idle-cut 5 1 authentication ipoe none authorization ipoe none accounting ipoe none # domain system # domain default enable system # role name level-0 description Predefined level-0 role # role name level-1 description Predefined level-1 role # role name level-2 description Predefined level-2 role # role name level-3 description Predefined level-3 role # role name level-4 description Predefined level-4 role # role name level-5 description Predefined level-5 role # role name level-6 description Predefined level-6 role # role name level-7 description Predefined level-7 role # role name level-8 description Predefined level-8 role # role name level-9 description Predefined level-9 role # role name level-10 description Predefined level-10 role # role name level-11 description Predefined level-11 role # role name level-12 description Predefined level-12 role # role name level-13 description Predefined level-13 role # role name level-14 description Predefined level-14 role # user-group system # local-user admin class manage service-type telnet http https authorization-attribute user-role network-admin # security-enhanced level 2 # session statistics enable # # url-filter policy 8048_url_profile_global default-action permit # url-filter category custom severity 65535 # app-profile 8048_url_profile_global url-filter apply policy 8048_url_profile_global # wlan ap-group default-group vlan 1 provision ac ip 10.10.0.1 dns server ip 10.10.0.2 # wlan ap 4F-AP model WA5530-SI serial-id 219801A1BW8216E0005H map-configuration flash:/portal_pageinfo.txt provision auto-recovery enable provision auto-update enable vlan 1 radio 1 radio enable service-template 168 vlan 110 radio 2 radio enable service-template 168 vlan 110 radio 3 radio enable service-template guest vlan 120 provision ac ip 10.10.0.1 dns server ip 10.10.0.2 ac host-name MSR36 ip address 10.10.0.110 255.255.255.0 gateway ip 10.10.0.1 module 1 module 2 module 3 module 4 module 5 module 6 module 7 module 8 module 9 module 10 module 11 module 12 module 13 module 14 module 15 module 16 gigabitethernet 1 gigabitethernet 2 # traffic-policy rule 1 name web_AppTraffRank application app http rule 2 name OasisPolicyRule action qos profile oasisprofile application app http profile name oasisprofile # dac log-collect service dpi traffic enable dac traffic-statistic application enable # dac storage service dpi traffic limit hold-time 1 dac storage service traffic limit hold-time 1 # cloud-management server domain # return
想贴配置出来贴不了
找出原因了。telnet进AC里面把连接端口改成Trunk模式就可以了
(0)
修正,应该是telnet进AP里面把连接端口改成Trunk模式就可以了
修正,应该是telnet进AP里面把连接端口改成Trunk模式就可以了
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
想贴配置出来贴不了