UAP380格式化flash后通过bootware上传报错
- 0关注
- 0收藏，556浏览
问题描述：
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing......Done.
****************************************************************************
H3C UAP380-MSG BootWare, Version 7.03
****************************************************************************
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd.
Compiled Date : Jul 14 2020
CPU Type : ARM
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
CPU Clock Speed : 710MHz
Memory Type : DDR3
SDRAM Memory Size : 1024MB
Memory Speed : 667MHz
Flash Size : 256MB
PCB Version : Ver.B
BootWare Validating...
Image program does not exist.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot | ============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 7
=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 1 Loading..................................................................... ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ ............................................................................ .................Done.
97702912 bytes downloaded!
No Basic BootWare File
No Extended BootWare File
通过https://www.h3c.com/cn/d_202302/1786769_30005_40.htm这里下载的文件，试了多个版本都一样缺少这两个文件。
组网及组网描述：
- 2023-11-20提问
- 举报
-
(1)
最佳答案
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
===============================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 3（此处输入）
================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
=============================================================
4.
Enter your choice(0-5): 5
===========<ETHERNET PARAMETER SET>=====================
|Note: "." = Clear field.
| "-" = Go to previous field.
| Ctrl+D = Quit.
===============================================================
Protocol (FTP or TFTP) : TFTP
//忽略输出内容，直接输入TFTP，然后回车
Load File Name :MSG360_40-CMW710-R5221.ipe
//忽略输出内容，直接输入MSG360_40-CMW710-R5221.ipe，然后回车
Target File Name :MSG360_40-CMW710-R5221.ipe
//忽略输出内容，直接输入MSG360_40-CMW710-R5221.ipe，然后回车
Server IP Address :192.168.0.1
//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车
Local IP Address :192.168.0.50
//忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车
Gateway IP Address :0.0.0.0
//忽略输出内容，直接回车
=============<Enter Ethernet SubMenu>==========================
Note:the operating device is flash
|<1> Download Image Program To SDRAM And Run
|<2> Update Main Image File
|<3> Update Backup Image File
|<4> Download Files(*.*)
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
=============================================================
Enter your choice(0-5): 2 //此时可以看到TFTP服务器上数据上传的滚动
Loading.....................................................................
....................................Done!
5.
=================<Enter Ethernet SubMenu>==========================
Note:the operating device is flash
|<1> Download Image Program To SDRAM And Run
|<2> Update Main Image File
|<3> Update Backup Image File
|<4> Download Files(*.*)
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
|=================================================================
Enter your choice(0-5): 0
6.
==================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot
Enter your choice(0-9): 0
System is starting...
重启设备完成后就可以使用设备管理地址登录MSG360进行管理，查看版本是否升级成功，命令行下通过命令
<H3C>display version
H3C Comware Software, Version 7.1.064, Release 5221
- 2023-11-20回答
- 评论(1)
- 举报
-
(1)
已解决，谢谢
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
已解决，谢谢