问题描述：
使用MESH组网的AP会掉线然后马上又会自动联上。
创建的mesh组信息配置如下
[IFC28F-BG-HX-HC3510H-AC01]wlan ap-group mesh
[IFC28F-BG-HX-HC3510H-AC01-wlan-ap-group-mesh]dis this
#
wlan ap-group mesh
vlan 1
ap IFC25F-AP06
ap IFC25F-AP06-WC
ap IFC27F-AP06
ap IFC27F-AP06-WC
ap IFC28F-AP06-1
ap IFC28F-AP06-WC
ap IFC29F-AP05
ap IFC29F-AP05-01
ap IFC29F-AP05-WC
ap IFC30F-AP07
ap IFC30F-AP07-WC
interface wlan-mesh 2
mesh-port link-type trunk
mesh-port trunk permit vlan all
ap-model WA4320-ACN-SI
map-configuration cfa0:/beiqinglu.txt
radio 1
max-power 20
radio enable
channel band-width 40
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
radio 2
radio enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
gigabitethernet 1
ap-model WA5320-C
map-configuration cfa0:/beiqinglu.txt
radio 1
radio enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
radio 2
radio enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
gigabitethernet 1
gigabitethernet 2
ap-model WA5530-SI
map-configuration cfa0:/beiqinglu.txt
radio 1
max-power 20
radio enable
channel band-width 40
option keep-active enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
radio 2
max-power 20
radio enable
channel band-width 40
option keep-active enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
radio 3
rate mandatory 11
rate supported 12 18 24 36 48 54
rate disabled 1 2 5.5 6 9
radio enable
option keep-active enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
gigabitethernet 1
gigabitethernet 2
ap-model WA6320
map-configuration cfa0:/beiqinglu.txt
radio 1
radio enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
radio 2
radio enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
gigabitethernet 1
ap-model WA6622
map-configuration cfa0:/beiqinglu6622.txt
radio 1
radio enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
radio 2
radio enable
option roam-navigation enable rssi 23 probe-response-power 12
option client hide-node-protection enable
option client reconnect enable rssi 25 interval 6
option client reject enable
service-template 1 vlan-group huafa+
service-template 2 vlan 154
service-template 4 vlan 155
service-template device vlan 155
client-rate-limit enable
client-rate-limit inbound mode static cir 10240
client-rate-limit outbound mode static cir 10240
mesh-interface 2
mesh-policy name 1
mesh-profile 1
rrm
calibrate-channel self-decisive disable
interference-threshold 50
tolerance-level 20
calibrate-power self-decisive disable
calibrate-power threshold 65
gigabitethernet 1
smartrate-ethernet 1
MESH链路信息：
[IFC28F-BG-HX-HC3510H-AC01]dis wlan mesh-l
[IFC28F-BG-HX-HC3510H-AC01]dis wlan mesh-link ap
AP name: IFC25F-AP06
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC25F-AP06-WC 7450-4e17-aa84 743a-2010-7144 Forwarding 32 1803489/6783719
AP name: IFC25F-AP06-WC
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC25F-AP06 743a-2010-7144 7450-4e17-aa84 Forwarding 25 6779549/1803560
AP name: IFC27F-AP06
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC27F-AP06-WC 7450-4e17-ab84 743a-2010-60a4 Forwarding 36 2236106/6381224
AP name: IFC27F-AP06-WC
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC27F-AP06 743a-2010-60a4 7450-4e17-ab84 Forwarding 33 6369628/2238600
AP name: IFC28F-AP06-1
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC28F-AP06-WC 4077-a996-a944 4077-a996-b274 Forwarding 25 111179/275761
AP name: IFC28F-AP06-WC
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC28F-AP06-1 4077-a996-b274 4077-a996-a944 Forwarding 18 277309/112366
AP name: IFC29F-AP05-01
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC29F-AP05-WC 7450-4e17-a7d4 1019-6508-8f94 Forwarding 51 2810243/8464979
AP name: IFC29F-AP05-WC
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC29F-AP05-01 1019-6508-8f94 7450-4e17-a7d4 Forwarding 23 8446585/2826091
AP name: IFC30F-AP07
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC30F-AP07-WC 7450-4e17-ad14 00be-d576-1154 Forwarding 44 3690009/17153311
AP name: IFC30F-AP07-WC
Peer Name Peer Mac Local Mac Status RSSI Packets(Rx/Tx)
IFC30F-AP07 00be-d576-1154 7450-4e17-ad14 Forwarding 29 17128756/3693726
MPP AP信息配置：
[IFC28F-BG-HX-HC3510H-AC01] wlan ap IFC28F-AP06-1
[IFC28F-BG-HX-HC3510H-AC01-wlan-ap-IFC28F-AP06-1]dis this
#
wlan ap IFC28F-AP06-1 model WA5530-SI
serial-id 219801A1BW819AE006K6
vlan 1
portal-service enable
radio 1
channel 44
max-power 15
radio enable
channel band-width 20
service-template shenji vlan 112
mesh peer-mac-address 4077-a996-a940
radio 2
channel 157
max-power 8
radio disable
channel band-width 20
service-template shenji vlan 112
mesh peer-mac-address 4077-a996-a950
radio 3
channel 13
radio enable
service-template shenji vlan 112
mesh peer-mac-address 4077-a996-a960
gigabitethernet 1
gigabitethernet 2
#
MAP信息配置
[IFC28F-BG-HX-HC3510H-AC01]wlan ap IFC28F-AP06-WC
[IFC28F-BG-HX-HC3510H-AC01-wlan-ap-IFC28F-AP06-WC]dis this
#
wlan ap IFC28F-AP06-WC model WA5530-SI
serial-id 219801A1BW819AE006HM
vlan 1
radio 1
channel 44
radio enable
channel band-width 20
mesh peer-mac-address 4077-a996-b270
radio 2
channel 157
max-power 8
radio disable
channel band-width 20
mesh peer-mac-address 4077-a996-b280
radio 3
channel 13
radio enable
mesh peer-mac-address 4077-a996-b290
gigabitethernet 1
gigabitethernet 2
[IFC28F-BG-HX-HC3510H-AC01]dis wlan ap name IFC28F-AP06-WC ve
[IFC28F-BG-HX-HC3510H-AC01]dis wlan ap name IFC28F-AP06-WC verbose
AP name : IFC28F-AP06-WC
AP ID : 35
AP group name : mesh
State : Run
Backup type : Master
Ready-for-Switchover : Ready
Online time : 0 days 0 hours 30 minutes 14 seconds
System uptime : 33 days 15 hours 18 minutes 32 seconds
Model : WA5530-SI
Region code : CN
Region code lock : Disabled
Serial ID : 219801A1BW819AE006HM
MAC address : 4077-a996-a940
IP address : 10.234.2.71
UDP control port number : 21230
UDP data port number : 21230
H/W version : Ver.B
S/W version : R2469
Boot version : 7.31
USB state : N/A
Power level : Middle
Power info : PoE(UNKNOWN)
PoE status : Port 2
: Disabled
map file : cfa0:/beiqinglu.txt
Description : Not configured
Priority : 4
Echo interval : 10 seconds
Echo count : 3 counts
Keepalive interval : 10 seconds
Discovery-response wait-time : 2 seconds
Statistics report interval : 50 seconds
Fragment size (data) : 1500
Fragment size (control) : 1450
MAC type : Local MAC & Split MAC
Tunnel mode : Local Bridging & 802.3 Frame & Native Frame
CAPWAP data-tunnel status : Up
Discovery type : Unknown
Retransmission count : 3
Retransmission interval : 5 seconds
Firmware upgrade : Enabled
Sent control packets : 1995
Received control packets : 1995
Echo requests : 179
Lost echo responses : 0
Average echo delay : 21
Last reboot reason : Power on
Latest IP address : 10.234.2.71
Current AC IP : 10.234.2.2
Tunnel down reason : AP interface went down
Connection count : 31
Backup IPv4 : Not configured
Backup IPv6 : Not configured
Ctrl-tunnel encryption : Disabled
Ctrl-tunnel encryption state : Not encrypted
Data-tunnel encryption : Disabled
Data-tunnel encryption state : Not encrypted
LED mode : Normal
Remote configuration : Disabled
EnergySaving Level : N/A
AP type : Normal AP
Radio 1:
BSSID : 4077-a996-a940
State : Up
Type : 802.11ac(5GHz)
Antenna type : internal
Client dot11ac-only : Disabled
Client dot11n-only : Disabled
Channel bandwidth : 20MHz
Operating bandwidth : 20MHz
Secondary channel mode : SCN
Short GI for 20MHz : Supported
Short GI for 40MHz : Supported
Short GI for 80MHz : Supported
Short GI for 160MHz : Not supported
MIMO : 2*2
Green-Energy-Management : Disabled
A-MSDU : Enabled
A-MPDU : Enabled
LDPC : Supported
STBC : Supported
Operational VHT-MCS Set:
Mandatory : Not configured
Supported : NSS1 0,1,2,3,4,5,6,7,8
NSS2 0,1,2,3,4,5,6,7,8
Multicast : Not configured
Operational HT MCS Set:
Mandatory : Not configured
Supported : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15
Multicast : Not configured
Channel : 44
Channel usage(%) : 3
Max power : 20 dBm
Operational rate:
Mandatory : 6, 12, 24 Mbps
Multicast : Auto
Supported : 9, 18, 36, 48, 54 Mbps
Disabled : Not configured
Distance : 1 km
ANI : Enabled
Fragmentation threshold : 2346 bytes
Beacon interval : 100 TU
Protection threshold : 2346 bytes
Long retry threshold : 4
Short retry threshold : 7
Frame aging time in cache : 2000 ms
Noise floor : -105 dBm
Protection mode : cts-to-self
MU-TxBF : Disabled
SU-TxBF : Disabled
Continuous mode : N/A
ATF : Disabled
radar-detect switch : Enabled
HT protection mode : No protection
Radio 2:
BSSID : 4077-a996-a950
State : Down
Type : 802.11ac(5GHz)
Antenna type : internal
Client dot11ac-only : Disabled
Client dot11n-only : Disabled
Channel bandwidth : 20MHz
Operating bandwidth : 20MHz
Secondary channel mode : SCN
Short GI for 20MHz : Supported
Short GI for 40MHz : Supported
Short GI for 80MHz : Supported
Short GI for 160MHz : Not supported
MIMO : 2*2
Green-Energy-Management : Disabled
A-MSDU : Enabled
A-MPDU : Enabled
LDPC : Supported
STBC : Supported
Operational VHT-MCS Set:
Mandatory : Not configured
Supported : NSS1 0,1,2,3,4,5,6,7,8
NSS2 0,1,2,3,4,5,6,7,8
Multicast : Not configured
Operational HT MCS Set:
Mandatory : Not configured
Supported : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15
Multicast : Not configured
Channel : 157
Channel usage(%) : 0
Max power : 8 dBm
Operational rate:
Mandatory : 6, 12, 24 Mbps
Multicast : Auto
Supported : 9, 18, 36, 48, 54 Mbps
Disabled : Not configured
Distance : 1 km
ANI : Enabled
Fragmentation threshold : 2346 bytes
Beacon interval : 100 TU
Protection threshold : 2346 bytes
Long retry threshold : 4
Short retry threshold : 7
Frame aging time in cache : 2000 ms
Noise floor : 0 dBm
Protection mode : cts-to-self
MU-TxBF : Disabled
SU-TxBF : Disabled
Continuous mode : N/A
ATF : Disabled
radar-detect switch : Enabled
HT protection mode : No protection
Radio 3:
BSSID : 4077-a996-a960
State : Up
Type : 802.11n(2.4GHz)
Antenna type : internal
Client dot11n-only : Disabled
Channel bandwidth : 20MHz
Operating bandwidth : 20MHz
Secondary channel mode : SCN
Short GI for 20MHz : Supported
Short GI for 40MHz : Supported
MIMO : 2*2
Green-Energy-Management : Disabled
A-MSDU : Enabled
A-MPDU : Enabled
LDPC : Supported
STBC : Supported
Operational HT MCS Set:
Mandatory : Not configured
Supported : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15
Multicast : Not configured
Channel : 13
Channel usage(%) : 11
Max power : 20 dBm
Preamble type : Short
Operational rate:
Mandatory : 11 Mbps
Multicast : Auto
Supported : 12, 18, 24, 36, 48, 54 Mbps
Disabled : 1, 2, 5.5, 6, 9 Mbps
Distance : 1 km
ANI : Enabled
Fragmentation threshold : 2346 bytes
Beacon interval : 100 TU
Protection threshold : 2346 bytes
Long retry threshold : 4
Short retry threshold : 7
Frame aging time in cache : 2000 ms
Noise floor : -105 dBm
Protection mode : cts-to-self
Continuous mode : N/A
ATF : Disabled
radar-detect switch : Enabled
HT protection mode : No protection
MAP故障信息：
[IFC28F-BG-HX-HC3510H-AC01]dis wlan ap statistics tu
[IFC28F-BG-HX-HC3510H-AC01]dis wlan ap statistics tunnel-down-record
AP name AP ID Tunnel down at Tunnel Down Reason Tunnel Down Count
IFC28F-AP06-WC 35 11-28/10:23:27 AP interface went down 30
IFC27F-AP06-WC 21 11-24/21:32:19 AP interface went down 13
IFC25F-AP06-WC 7 11-24/11:21:41 AP interface went down 7
IFC29F-AP05-WC 49 11-24/11:20:14 AP interface went down 51
IFC30F-AP07-WC 64 11-20/12:41:20 AP interface went down 31
- 2023-11-28提问
- 举报
-
(0)
最佳答案
您好，参考
V7 无线瘦瘦桥接案例
1 配置需求或说明
1.1 适用产品系列
本手册适用产品及系列参考附录：设备适配表。
1.2 配置需求及实现的效果
本案例实现WX2540H下联ap WA5320-C-EI与远端apWA5530做mesh链路，实现瘦瘦桥接，给终端提供Mesh-network的无线网路，为客户端分配192.168.2.0/24的地址。
该案例中AC为WX2540H，MPP为WA5320-C-EI负责连接无线Mesh网络和非Mesh网络，MAP为WA5530同时提供Mesh服务和接入服务。
2 组网图
3 配置步骤
3.1 配置Mesh功能
# 创建一个编号为1的Mesh Profile。
<AC> system-view
[AC] wlan mesh-profile 1
# 配置Mesh ID为1。
[AC-wlan-mesh-profile-1] mesh-id 1
# 配置认证模式为SAE。
[AC-wlan-mesh-profile-1] akm mode sae
# 配置预共享密钥为12345678。
[AC-wlan-mesh-profile-1] preshared-key pass-phrase simple 12345678
# 开启Mesh Profile。
[AC-wlan-mesh-profile-1] mesh-profile enable
[AC-wlan-mesh-profile-1] quit
3.2 配置无线服务模板
# 配置无线服务模板1，配置SSID为Mesh-network，并使能服务模板。
[AC] wlan service-template service1
[AC-wlan-st-s1] ssid Mesh-network
[AC-wlan-st-1] service-template enable
[AC-wlan-st-1] quit
3.3 配置MPP
# 创建AP的模板，名称为mesh1，型号名称选择WA5320-C-EI，并配置AP的序列号为xxxxx。
[AC] wlan ap mesh1 model WA5320-C-EI
[AC-wlan-ap-mesh1] serial-id xxxxx
# 将Mesh Profile 1绑定到mesh1的Radio 1口。
[AC-wlan-ap-mesh1] radio 1
[AC-wlan-ap-mesh1-radio-1] mesh-profile 1
# 配置射频类型为dot11n（5GHz）。
[AC-wlan-ap-mesh1-radio-1] type dot11an
# 配置射频工作信道为149。
[AC-wlan-ap-mesh1-radio-1] channel 149
# 开启Radio。
[AC-wlan-ap-mesh1-radio-1] radio enable
[AC-wlan-ap-mesh1-radio-1] quit
# 配置MPP停止发送邻居探测请求。
[AC-wlan-ap-mpp] portal-service enable
[AC-wlan-ap-mpp] quit
3.4 配置MAP
# 创建AP的模板，名称为mesh2，型号名称选择WA5530，并配置AP的序列号为xxxx。
[AC] wlan ap mesh2 model wa5530
[AC-wlan-ap-mesh2] serial-id xxxxx
# 将Mesh Profile 1绑定到mesh2的Radio 1口。
[AC-wlan-ap-mesh2] radio 1
[AC-wlan-ap-mesh2-radio-1] mesh-profile 1
# 将无线服务模板service1绑定到mesh2的Radio 1口。
[AC-wlan-ap-mesh2-radio-1] service-template 1 vlan 3
# 配置射频类型为dot11n（5GHz）。
[AC-wlan-ap-mesh2-radio-1] type dot11an
# 配置射频工作信道为149。
[AC-wlan-ap-mesh2-radio-1] channel 149
# 向MESH2的邻居白名单中添加MPP上Radio 1的MAC地址，使MESH2仅与MPP建立Mesh连接，以避免环路的产生。
[AC-wlan-ap-mesh2-radio-1] mesh peer-mac-address xxxx-xxxx-xxxx
# 开启射频功能。
[AC-wlan-ap-mesh2-radio-1] radio enable
[AC-wlan-ap-mesh2-radio-1] quit
[AC-wlan-ap-mesh2] quit
3.5 结果验证
在AC上查看上线AP，角色为MPP的mesh1，角色为MAP的mesh2两个AP均上线
<H3C>dis wlan ap all
Total number of APs: 2
Total number of connected APs: 2
Total number of connected manual APs: 2
Total number of connected auto APs: 0
Total number of connected common APs: 2
Total number of connected WTUs: 0
Total number of inside APs: 0
Maximum supported APs: 48
Remaining APs: 46
Total AP licenses: 16
Local AP licenses: 16
Server AP licenses: 0
Remaining Local AP licenses: 14
Sync AP licenses: 0
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run, M = Master, B = Backup
AP name APID State Model Serial ID
mesh1 2 R/M WA5320-C-EI 219801Axxxx
mesh2 3 R/M WA5530 219801Axxxx
<H3C>dis wlan mesh-link ap //查看AC上的Mesh链路信息
AP name: mesh1
Peer Local Status RSSI Packets(Rx/Tx)
60da-838b-79a0 9c06-1bce-7fc0 Forwarding 73 1355/1343
AP name: mesh2
Peer Local Status RSSI Packets(Rx/Tx)
9c06-1bce-7fc0 60da-838b-79a0 Forwarding 76 1431/1374
<H3C>dis wlan client //无线终端连接mesh2桥接AP并获取业务地址。
Total number of clients: 1
MAC address User name AP name R IP address VLAN
a2ad-8c6f-20af N/A mesh2 2 192.168.2.1 3
- 2023-11-28回答
- 评论(0)
- 举报
-
(0)
这个是客户配置有问题吗？MPP上要配mesh peer-mac-address xxxx-xxxx-xxxx吗。
掉线原因：AP interface went down这个是什么原因。
- 2023-11-28回答
- 评论(0)
- 举报
-
(0)
暂无评论
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论