ACG1000 AK240产品忘记WEB管理

按照第一步：重启设备，在console口上立刻按住ctrl+B，进入如下boot界面

按上面方法进入的不是   ===============================================================

        |            BOOT MENU(V2.0-20150126)                         |
        |  1. Upgrade image by FTP.                                   |
        |  2. Upgrade menuboot by FTP.                                |
        |  3. Check and repare file system.                           |
        |  4. Reset administrator passowrd.                           |
        |  5. Producing test.                                         |
        |  6. Aging test.                                             |
        |  7. Display production and aging recored.                   |
        |  8. Advance functions.                                      |
        |  0. Reboot.                                                 |
        |                                                             |
        =========================================================

进入的是

SPI▒SPI stage 1 bootloader SPI ID: ef:40:17:00:00 header found at offset 0x10000 Image 1.2: address: 0xffffffffc0000000, header length: 192, data length: 458544 Validating data... Starting stage 1.5 bootloader at 0xffffffff81000000 Warning: Board descriptor tuple not found in eeprom, using defaults OCTEON CN7020-SCP pass 1.2, Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR) Base DRAM address used by u-boot: 0x8fc00000, size: 0x400000 DRAM: 2 GiB Clearing DRAM...... done Using default environment MMC: Octeon MMC/SD0: 1 SF: Detected W25Q64CV with page size 256 Bytes, erase size 4 KiB, total 8 MiB Found valid SPI bootloader at offset: 0x100000, size: 1534424 bytes U-Boot 3.6.2 (Build time: Jul 22 2021 - 19:30:33) Using DRAM size from environment: 2048 MBytes OCTEON CN7020-SCP pass 1.2, Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR) Base DRAM address used by u-boot: 0x8e000000, size: 0x2000000 DRAM: 2 GiB Clearing DRAM...... done xspeed CUST_NF04 board detected sata detected Octeon MMC/SD0: 1 Flash boot bus region not enabled, skipping NOR flash config PCIe: Link timeout on port 0, probably the slot is empty PCIe: Port 1 stuck in reset, skipping. PCIe: Port 2 not in PCIe mode, skipping PCI console init succeeded, 1 consoles, 1024 bytes each POE 1 exist! POE 2 exist! set led1 reg_val :56 0x85, 0x85, 0x52, 0x0 Press CTRL+C to enter menuboot: 0 Octeon cust_nfxx(ram)#

这是什么情况？？？