其中一条link链路会断,一条宽带就没问题,两条均为DHCP
两台防火墙,堆叠,上行reth口,到交换机。
其中一条link链路会断,一条宽带就没问题,两条均为DHCP
两台防火墙,堆叠,上行reth口,到交换机。
(0)
最佳答案
链路UP,业务不能用还是链路down,贴份配置看看
(0)
<f100>dis u ^ % Ambiguous command found at '^' position. <f100>dis cu # version 7.1.064, Release 9560P41 # sysname f100 # clock protocol none # context Admin id 1 # irf mac-address persistent timer irf auto-update enable undo irf link-delay irf member 1 priority 32 irf member 2 priority 30 # track 1 interface GigabitEthernet1/0/5 physical # track 2 interface GigabitEthernet2/0/5 physical # track 3 interface GigabitEthernet1/0/4 physical # track 4 interface GigabitEthernet2/0/4 physical # ip unreachables enable ip ttl-expires enable # dhcp enable # dns server 202.96.199.133 dns server 223.5.5.5 # lldp global enable # password-recovery enable # vlan 1 # vlan 888 # vlan 1000 # irf-port 1/1 port group interface GigabitEthernet1/0/10 port group interface GigabitEthernet1/0/11 # irf-port 2/2 port group interface GigabitEthernet2/0/10 port group interface GigabitEthernet2/0/11 # stp global enable # nqa template icmp icmp1 destination ip 202.96.199.133 next-hop ip 192.168.10.1 out interface Reth1 # nqa template icmp icmp2 destination ip 202.96.199.133 next-hop ip 192.168.1.1 out interface Reth2 # controller Cellular1/0/0 # controller Cellular1/0/1 # controller Cellular2/0/0 # controller Cellular2/0/1 # interface Reth1 description DHCP-1000M ip address dhcp-alloc member interface GigabitEthernet1/0/4 priority 100 member interface GigabitEthernet2/0/4 priority 50 nat outbound # interface Reth2 description dhcp-500m shutdown ip address 192.168.1.6 255.255.255.0 member interface GigabitEthernet1/0/5 priority 100 member interface GigabitEthernet2/0/5 priority 50 nat outbound nat server protocol tcp global 192.168.1.6 12305 inside 192.168.100.4 22 rule ServerRule_2 nat server protocol tcp global 192.168.1.6 12306 inside 192.168.100.4 1194 rule ServerRule_1 # interface Reth3 ip address 10.1.1.1 255.255.255.252 member interface Route-Aggregation1 priority 100 member interface Route-Aggregation2 priority 50 # interface Route-Aggregation1 # interface Route-Aggregation2 # interface NULL0 # interface Vlan-interface888 description bfd-mad mad bfd enable mad ip address 1.1.1.1 255.255.255.252 member 1 mad ip address 1.1.1.2 255.255.255.252 member 2 # interface Vlan-interface1000 ip address 100.100.100.1 255.255.255.0 # interface GigabitEthernet1/0/0 port link-mode route combo enable copper # interface GigabitEthernet1/0/1 port link-mode route combo enable fiber # interface GigabitEthernet1/0/3 port link-mode route # interface GigabitEthernet1/0/4 port link-mode route # interface GigabitEthernet1/0/5 port link-mode route # interface GigabitEthernet1/0/6 port link-mode route port link-aggregation group 1 # interface GigabitEthernet1/0/7 port link-mode route # interface GigabitEthernet1/0/8 port link-mode route manage http inbound manage http outbound manage https inbound manage https outbound manage ping inbound manage ping outbound manage ssh inbound manage ssh outbound manage telnet inbound manage telnet outbound port link-aggregation group 1 # interface GigabitEthernet2/0/0 port link-mode route combo enable fiber # interface GigabitEthernet2/0/1 port link-mode route combo enable fiber # interface GigabitEthernet2/0/2 port link-mode route # interface GigabitEthernet2/0/3 port link-mode route # interface GigabitEthernet2/0/4 port link-mode route # interface GigabitEthernet2/0/5 port link-mode route # interface GigabitEthernet2/0/6 port link-mode route port link-aggregation group 2 # interface GigabitEthernet2/0/7 port link-mode route # interface GigabitEthernet2/0/8 port link-mode route port link-aggregation group 2 # interface GigabitEthernet1/0/2 port link-mode bridge port access vlan 1000 # interface GigabitEthernet1/0/9 port link-mode bridge port access vlan 888 undo stp enable # interface GigabitEthernet2/0/9 port link-mode bridge port access vlan 888 undo stp enable # interface GigabitEthernet1/0/10 # interface GigabitEthernet1/0/11 # interface GigabitEthernet2/0/10 # interface GigabitEthernet2/0/11 # security-zone name Local # security-zone name Trust import interface GigabitEthernet1/0/6 import interface GigabitEthernet1/0/8 import interface GigabitEthernet2/0/6 import interface GigabitEthernet2/0/8 import interface Reth3 import interface Vlan-interface1000 import interface GigabitEthernet1/0/2 vlan 1000 # security-zone name DMZ # security-zone name Untrust import interface GigabitEthernet1/0/4 import interface GigabitEthernet1/0/5 import interface GigabitEthernet2/0/4 import interface GigabitEthernet2/0/5 import interface Reth1 import interface Reth2 # security-zone name Management import interface GigabitEthernet1/0/0 # scheduler logfile size 16 # line class aux user-role network-operator # line class console authentication-mode scheme user-role network-admin # line class vty user-role network-operator # line aux 0 user-role network-admin # line aux 1 user-role network-operator # line con 0 1 user-role network-admin # line vty 0 63 authentication-mode scheme user-role network-admin # ip route-static 0.0.0.0 0 192.168.10.1 ip route-static 0.0.0.0 0 192.168.1.1 ip route-static 172.16.20.0 23 10.1.1.2 ip route-static 172.16.30.0 23 10.1.1.2 ip route-static 172.16.40.0 23 10.1.1.2 ip route-static 192.168.20.0 23 10.1.1.2 ip route-static 192.168.30.0 23 10.1.1.2 ip route-static 192.168.40.0 23 10.1.1.2 ip route-static 192.168.50.0 23 10.1.1.2 ip route-static 192.168.100.0 24 10.1.1.2 ip route-static 192.168.200.0 23 10.1.1.2 ip route-static 192.168.210.0 23 10.1.1.2 ip route-static 192.168.220.0 24 10.1.1.2 # performance-management # ssh server enable # arp ip-conflict log prompt # redundancy group 1 preempt-delay seconds 10 member interface Reth1 member interface Reth2 node 1 bind slot 1 priority 100 track 1 interface GigabitEthernet1/0/5 track 3 interface GigabitEthernet1/0/4 node 2 bind slot 2 priority 50 track 2 interface GigabitEthernet2/0/5 track 4 interface GigabitEthernet2/0/4 # acl advanced 3001 rule 0 permit ip source 192.168.200.0 0.0.1.255 # acl advanced 3002 rule 0 permit ip source 192.168.20.0 0.0.1.255 rule 5 permit ip source 192.168.30.0 0.0.1.255 rule 10 permit ip source 192.168.40.0 0.0.1.255 rule 15 permit ip source 192.168.50.0 0.0.1.255 # undo password-control blacklist all-line # domain system # domain default enable system # role name level-0 description Predefined level-0 role # role name level-1 description Predefined level-1 role # role name level-2 description Predefined level-2 role # role name level-3 description Predefined level-3 role # role name level-4 description Predefined level-4 role # role name level-5 description Predefined level-5 role # role name level-6 description Predefined level-6 role # role name level-7 description Predefined level-7 role # role name level-8 description Predefined level-8 role # role name level-9 description Predefined level-9 role # role name level-10 description Predefined level-10 role # role name level-11 description Predefined level-11 role # role name level-12 description Predefined level-12 role # role name level-13 description Predefined level-13 role # role name level-14 description Predefined level-14 role # user-group system # local-user admin class manage password hash $h$6$+9Pfp60D3mzXMRw6$C2Yr3891uCLqk4cSj5q5zD5SUc//nwngSyPgjKb20vLJl7s3EDQanUw+V1xJl6qTOKF5ATOvapE5jR64niqXDw== service-type ssh terminal https authorization-attribute user-role level-3 authorization-attribute user-role network-admin authorization-attribute user-role network-operator # session statistics enable session dual-active enable session synchronization enable session synchronization dns http # ipsec logging negotiation enable # ike logging negotiation enable # ip https enable # loadbalance link-group linkgroup1 transparent enable probe icmp1 success-criteria at-least 1 link link1 success-criteria at-least 1 # loadbalance link-group linkgroup2 transparent enable probe icmp2 success-criteria at-least 1 link link2 success-criteria at-least 1 # loadbalance class neiwang type link-generic match-any match 1 source ip address 192.168.200.0 23 match 2 source ip address 172.16.20.0 23 match 3 source ip address 172.16.30.0 23 match 4 source ip address 172.16.40.0 23 match 5 source ip address 192.168.20.0 23 match 6 source ip address 192.168.30.0 23 match 7 source ip address 192.168.40.0 23 match 8 source ip address 192.168.50.0 23 match 9 source ip address 192.168.100.0 23 match 10 source ip address 192.168.210.0 23 match 100 source ip address 100.100.100.0 24 # loadbalance action ##defaultactionforllbipv4##%%autocreatedbyweb%% type link-generic link-group linkgroup2 # loadbalance action ##defaultactionforllbipv6##%%autocreatedbyweb%% type link-generic link-group linkgroup2 # loadbalance action ob$action$#for#neiwang type link-generic link-group linkgroup1 fallback-action continue # loadbalance action ob$actionipv6$neiwang type link-generic link-group linkgroup1 fallback-action continue # loadbalance policy ##defaultpolicyforllbipv4##%%autocreatedbyweb%% type link-generic class neiwang action ob$action$#for#neiwang default-class action ##defaultactionforllbipv4##%%autocreatedbyweb%% # loadbalance policy ##defaultpolicyforllbipv6##%%autocreatedbyweb%% type link-generic class neiwang action ob$actionipv6$neiwang default-class action ##defaultactionforllbipv6##%%autocreatedbyweb%% # virtual-server ##defaultvsforllbipv4##%%autocreatedbyweb%% type link-ip virtual ip address 0.0.0.0 0 lb-policy ##defaultpolicyforllbipv4##%%autocreatedbyweb%% bandwidth busy-protection enable bandwidth interface statistics enable service enable # virtual-server ##defaultvsforllbipv6##%%autocreatedbyweb%% type link-ip virtual ipv6 address :: 0 lb-policy ##defaultpolicyforllbipv6##%%autocreatedbyweb%% bandwidth busy-protection enable bandwidth interface statistics enable service enable # loadbalance isp file flash:/lbispinfo_v1.5.tp # loadbalance link link1 router ip 192.168.10.1 success-criteria at-least 1 probe icmp1 # loadbalance link link2 router ip 192.168.1.1 success-criteria at-least 1 probe icmp2 # security-policy ip rule 0 name any action pass logging enable source-zone Local source-zone Trust source-zone DMZ source-zone Untrust destination-zone Local destination-zone Trust destination-zone DMZ destination-zone Untrust # cloud-management server domain opstunnel-seccloud.h3c.com # return <f100> %Dec 6 16:29:56:043 2023 f100 SHELL/5/SHELL_LOGOUT: admin logged out from 192.168.50.4. %Dec 6 16:29:56:072 2023 f100 SSHS/6/SSHS_LOG: User admin logged out from 192.168.50.4 port 50594. %Dec 6 16:29:56:072 2023 f100 SSHS/6/SSHS_DISCONNECT: SSH user admin (IP: 192.168.50.4) disconnected from the server. <f100>%Dec 6 16:30:14:397 2023 f100 PING/6/PING_STATISTICS: Ping statistics for 192.168.10.1: 5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss, round-trip min/avg/max/std-dev = 0.366/0.570/0.976/0.210 ms.
这发的没法看 怎么能上传文本呀,哈哈
%Dec 6 16:30:34:666 2023 f100 LB/5/LB_CHANGE_LINKQUOTE_PROBERESULT: The probe state of (link group linkgroup2,link link2) template icmp2 was changed to Successful. %Dec 6 16:30:34:667 2023 f100 LB/5/LB_CHANGE_LINKQUOTE_HCSTATUS: The health state of (link group linkgroup2,link link2)was changed to Active. Last state was kept for 2655 seconds. %Dec 6 16:30:37:186 2023 f100 LB/5/LB_CHANGE_LINK_PROBERESULT: The probe state of link link2 template icmp2 was changed to Successful. %Dec 6 16:30:37:187 2023 f100 LB/5/LB_CHANGE_LINK_HCSTATUS: The health state of link link2 was changed to Active. Last state was kept for 1962 seconds. %Dec 6 16:30:37:187 2023 f100 LB/5/LB_LINK_STATE_ACTIVE: The state of link link2 is active. %Dec 6 16:30:37:188 2023 f100 LB/5/LB_CHANGE_LINKQUOTE_HCSTATUS: The health state of (link group linkgroup2,link link2)was changed to Active. Last state was kept for 3 seconds. %Dec 6 16:30:37:189 2023 f100 LB/5/LB_CHANGE_LG_STATUS: The number of available links in link group linkgroup2 reached the upper percentage (0%). %Dec 6 16:30:47:705 2023 f100 LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port GigabitEthernet1/0/5 (IfIndex 6), neighbor's chassis ID is 8c94-6acc-faa0, port ID is GigabitEthernet1/0/6.
一会好 一会链路就会检测失败 到网关都不通
(0)
都是dhcp的
正常用起来的时候吗,PPPOE拨号和IPTV的线路有会话数限制,到达一定量了就不行了。
都是dhcp的
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
%Dec 6 16:30:34:666 2023 f100 LB/5/LB_CHANGE_LINKQUOTE_PROBERESULT: The probe state of (link group linkgroup2,link link2) template icmp2 was changed to Successful. %Dec 6 16:30:34:667 2023 f100 LB/5/LB_CHANGE_LINKQUOTE_HCSTATUS: The health state of (link group linkgroup2,link link2)was changed to Active. Last state was kept for 2655 seconds. %Dec 6 16:30:37:186 2023 f100 LB/5/LB_CHANGE_LINK_PROBERESULT: The probe state of link link2 template icmp2 was changed to Successful. %Dec 6 16:30:37:187 2023 f100 LB/5/LB_CHANGE_LINK_HCSTATUS: The health state of link link2 was changed to Active. Last state was kept for 1962 seconds. %Dec 6 16:30:37:187 2023 f100 LB/5/LB_LINK_STATE_ACTIVE: The state of link link2 is active. %Dec 6 16:30:37:188 2023 f100 LB/5/LB_CHANGE_LINKQUOTE_HCSTATUS: The health state of (link group linkgroup2,link link2)was changed to Active. Last state was kept for 3 seconds. %Dec 6 16:30:37:189 2023 f100 LB/5/LB_CHANGE_LG_STATUS: The number of available links in link group linkgroup2 reached the upper percentage (0%). %Dec 6 16:30:47:705 2023 f100 LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port GigabitEthernet1/0/5 (IfIndex 6), neighbor's chassis ID is 8c94-6acc-faa0, port ID is GigabitEthernet1/0/6.