6800在DRNI组网下，备设备断电时，主设备down了接口
- 0关注
- 0收藏，583浏览
问题描述：
备设备断电时，为什么主设备的角色状态会变为None，且在5秒后主动把下行接口给down了？
%Dec 29 14:57:49:656 2023 IFNET/3/PHY_UPDOWN: Physical state on the interface FortyGigE1/0/53 changed to down.
%Dec 29 14:57:49:657 2023 LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port FGE1/0/53 of aggregation group BAGG100 changed to the inactive state, because the physical state of the port is down.
%Dec 29 14:57:49:658 2023 IFNET/5/LINK_UPDOWN: Line protocol state on the interface FortyGigE1/0/53 changed to down.
%Dec 29 14:57:49:705 2023 IFNET/3/PHY_UPDOWN: Physical state on the interface FortyGigE1/0/54 changed to down.
%Dec 29 14:57:49:708 2023 IFNET/5/LINK_UPDOWN: Line protocol state on the interface FortyGigE1/0/54 changed to down.
%Dec 29 14:57:49:717 2023 LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port FGE1/0/54 of aggregation group BAGG100 changed to the inactive state, because the physical state of the port is down.
%Dec 29 14:57:49:723 2023 IFNET/3/PHY_UPDOWN: Physical state on the interface Bridge-Aggregation100 changed to down.
%Dec 29 14:57:49:724 2023 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Bridge-Aggregation100 changed to down.
%Dec 29 14:57:49:866 2023 DRNI/6/DRNI_IPP_BLOCK: The status of IPP Bridge-Aggregation100 changed to blocked.
%Dec 29 14:57:49:920 2023 DRNI/6/DRNI_IFEVENT_IPP_DOWN: IPP Bridge-Aggregation100 went down.
%Dec 29 14:57:54:205 2023 DRNI/6/DRNI_KEEPALIVELINK_DOWN: Keepalive link went down.
%Dec 29 14:57:54:367 2023 DRNI/6/DRNI_SYSEVENT_DEVICEROLE_CHANGE: Device role changed from Primary to None.
%Dec 29 14:57:57:164 2023 IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/30 changed to down.
%Dec 29 14:57:57:173 2023 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/30 changed to down.
%Dec 29 14:57:57:249 2023 IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/31 changed to down.
组网及组网描述：
1/0/53和1/0/54口为peer linke口，1/0/30和1/0/31为下行服务器接口，keepalive是通过上行口发布的
MAD配置：
drni mad exclude interface FortyGigE1/0/49
drni mad exclude interface FortyGigE1/0/50
drni mad exclude interface FortyGigE1/0/51
drni mad exclude interface FortyGigE1/0/52
drni mad exclude interface LoopBack0
Monitor link配置：
- 2023-12-30提问
- 举报
-
(0)
最佳答案
根据描述和设备特性判断，导致业务中断原因是
由于M-LAG成员故障，因此触发M-LAG心跳超时。从而存活的M-LAG设备触发动作关闭了除保留接口以外的所有接口。正好服务器接口不在保留范围因此被down了。
处理建议
先了解组网详细细节和业务需求，合理配置设备优化网络。
- 2023-12-30回答
- 评论(1)
- 举报
-
(0)
确认了是版本bug，当IPL口down了之后，设备会把所有下行口给down了
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
确认了是版本bug，当IPL口down了之后，设备会把所有下行口给down了