环路都不亮,已确认板卡支持该设备
<H3C>dis version
H3C Comware Software, Version 7.1.064, Release 6728P26
Copyright (c) 2004-2023 New H3C Technologies Co., Ltd. All rights reserved.
H3C MSR56-60 uptime is 0 weeks, 0 days, 0 hours, 18 minutes
Last reboot reason : Power on
Boot image: cfa0:/msr56-cmw710-boot-r6728p26.bin
Boot image version: 7.1.064P80, Release 6728P26
Compiled Mar 15 2023 15:00:00
System image: cfa0:/msr56-cmw710-system-r6728p26.bin
System image version: 7.1.064, Release 6728P26
Compiled Mar 15 2023 15:00:00
Slot 0: MPU-100 uptime is 0 weeks, 0 days, 0 hours, 18 minutes
Last reboot reason : Power on
CPU ID: 0x3
2G bytes DDR3 SDRAM Memory
8M bytes Flash Memory
PCB Version: 2.0
CPLD Version: 3.0
Basic BootWare Version: 1.71
Extended BootWare Version: 1.71
[SUBSLOT 0]CON (Hardware)2.0, (Driver)1.0, (CPLD)3.0
[SUBSLOT 0]AUX (Hardware)2.0, (Driver)1.0, (CPLD)3.0
[SUBSLOT 0]MGE0 (Hardware)2.0, (Driver)1.0, (CPLD)3.0
Slot 2: SPU-100 uptime is 0 weeks, 0 days, 0 hours, 16 minutes
Last reboot reason : User reboot
CPU ID: 0x5
2G bytes DDR3 SDRAM Memory
8M bytes Flash Memory
PCB Version: 2.0
CPLD Version: 2.0
Basic BootWare Version: 1.50
Extended BootWare Version: 1.50
[SUBSLOT 0]GE2/0/0 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]GE2/0/1 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]GE2/0/2 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]GE2/0/3 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]CELLULAR2/0/0 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 0]CELLULAR2/0/1 (Hardware)2.0, (Driver)1.0, (CPLD)2.0
[SUBSLOT 1]HMIM-8GSWF (Hardware)2.0, (Driver)1.0, (CPLD)1.0
[H3C]dis boot-loader
Software images on slot 0:
Current software images:
cfa0:/msr56-cmw710-boot-r6728p26.bin
cfa0:/msr56-cmw710-system-r6728p26.bin
Main startup software images:
cfa0:/msr56-cmw710-boot-r6728p26.bin
cfa0:/msr56-cmw710-system-r6728p26.bin
Backup startup software images:
None
[H3C]dis device slot 2
Slot 2: SPU-100
Subslot No. Board Type Status Max Ports
--------------------------------------------------------------
0 Fixed SubCard on Board Normal 6
1 HMIM-8GSWF Normal 8
(0)
解决了,我是用电口测试的,所以:
默认接口配置了:combo enable fiber(启用光缆)
将接口改为:combo enable copper(启用铜缆)
(0)
暂无评论
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论