1.聚合配置问题:->聚合组配置了link-delay和undo stp enable.物理接口无显示,请问是否存在影响
#
interface Ten-GigabitEthernet1/0/5
port link-mode bridge
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 4 to 13
port link-aggregation group 1
#
return
dis cu int br 1
#
interface Bridge-Aggregation1
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 4 to 13
link-delay down 0
link-delay up 0
link-aggregation mode dynamic
undo stp enable
2.rrpp状态中,备接口的状态为:BLOCKED,下联的接入交换机状态正常,请问有影响吗
Domain ID : 1
Control VLAN : Primary 4092, Secondary 4093
Protected VLAN: Reference instance 1
Hello timer : 1 sec, Fail timer: 3 sec
Linkup-Delay timer: 0 sec
Fast detection status: Disabled
Fast-Hello timer: 20 ms, Fast-Fail timer: 60 ms
Fast-Edge-Hello timer: 10 ms, Fast-Edge-Fail timer: 30 ms
Ring ID : 1
Ring level : 0
Node mode : Master
Ring state : Complete
Enable status : Yes, Active status: Yes
Primary port : BAGG1 Port status: UP
Secondary port: BAGG2 Port status: BLOCKED
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论