S5130S-28S-HI，交换机重启时一直卡在下面的的循环中，中断进入系统后，所有接口都起不来

System is starting...
Cryptographic algorithms tests passed.

Startup configuration file doesn't exist or is invalid.
Performing automatic configuration... Press CTRL_C or CTRL_D to break.

Automatic configuration attempt: 1.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 2.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 3.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 4.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 5.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 6.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 7.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 8.
Not ready for automatic configuration: no interface available.
Waiting for the next...
Automatic configuration is aborted.
Line aux0 is available.

进入系统后

<MangNiuHai-2-NRT-SW>dis int g1/0/24
GigabitEthernet1/0/24
Current state: DOWN
Line protocol state: DOWN
IP packet frame type: Ethernet II, hardware address: 00dd-b6c9-8a21
Description: GigabitEthernet1/0/24 Interface
Bandwidth: 1000000 kbps
Loopback is not set
Media type is twisted pair
Port hardware type is 1000_BASE_T
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
Maximum frame length: 10240
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
PVID: 1
MDI type: Automdix
Port link-type: Access
 Tagged VLANs:   None
 Untagged VLANs: 1