问

单独AP通过Console线怎样升级版本

2024-06-12提问

0关注
0收藏，498浏览

Mr朱

Mr朱二段

粉丝：0人关注：0人

问题描述：

单独AP通过Console线怎样升级版本

最佳答案

资深小白

资深小白二段

粉丝：0人关注：3人

AP版本升级

1. 进入BootWare 主菜单

AP设备上电和重新启动的过程中，在配置终端的屏幕上首先将显示：

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU...

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing....Done.

****************************************************************************

* *

* H3C WA6320 BootWare, Version 7.20 *

* *

****************************************************************************

Compiled Date : Jan 11 2024

Memory Type : DDR4 SDRAM

Memory Size : 512MB

Flash Size : 128MB

PCB Version : Ver.A

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

为了阅读和便于理解，如果不做特殊说明，本菜单都将称为BootWare主菜单。

以上显示信息与设备实际情况相关，可能会略有差别。

当出现“Press Ctrl+B to access EXTENDED-BOOTWARE MENU...”时，键入<Ctrl+B>，系统进入BootWare主菜单：

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Enter your choice(0-9):

在BootWare主菜单下键入<3>，可以进入以太网口子菜单，系统显示如下：

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash |

|<1> Download Image Program To SDRAM And Run |

|<2> Update Main Image File |

|<3> Update Backup Image File |

|<4> Download Files(*.*) |

|<5> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

|<Ensure The Parameter Be Modified Before Downloading!> |

============================================================================

Enter your choice(0-5):

在以太网口子菜单下键入<5>，可以修改以太口参数，系统显示如下：

==========================<ETHERNET PARAMETER SET>==========================

|Note: "." = Clear field. |

| "-" = Go to previous field. |

| Ctrl+D = Quit. |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name :wa6300.ipe

Target File Name :wa6300.ipe

Server IP Address :192.168.1.1

Local IP Address :192.168.1.253

Subnet Mask :0.0.0.0

Gateway IP Address :0.0.0.0

以升级主启动文件为例，键入<2>升级主启动文件：

Loading.....................................................................

............................................................................

.....................................Done.

36462592 bytes downloaded!

Image file wa6300-boot.bin is self-decompressing...

Saving file flash:/wa6300-boot.bin .................................Done.

Image file wa6300-system.bin is self-decompressing...

Saving file flash:/wa6300-system.bin .......................................

................................Done.

选择<0>，返回BootWare主菜单：

Enter your choice(0-5): 0

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Enter your choice(0-9):

选择<1>，引导系统：

Enter your choice(0-9): 1

Loading the main image files...

Loading file flash:/wa6300-system.bin...........................Done.

Loading file flash:/wa6300-boot.bin..............Done.

Image file flash:/wa6300-boot.bin is self-decompressing.....................

............................................................................

.........................................Done.

System image is starting...

Startup configuration file doesn"t exist or is invalid.

Line con0 is available.

Press ENTER to get started.

升级完毕，使用display version命令查看版本信息已经是最新的V7版本。

CTRL + B进不去提示只有CTRL+D

Mr朱发表时间：2024-06-12 更多>>

CTRL + B进不去提示只有CTRL+D

Mr朱发表时间：2024-06-12

3 个回答

按时间按赞数

IT钟点工

IT钟点工九段

粉丝：97人关注：1人

通过ftp/tftp导入升级

Mr朱

Mr朱二段

粉丝：0人关注：0人

AP启动提示信息：

System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Boot ROM program does not exist.
Now start to download program.

=====================<BASIC-BOOTWARE MENU (Ver 7.08) >======================
|<1> Modify Serial Interface Parameter |
|<2> Update Extended BootWare |
|<3> Update Full BootWare |
|<4> Boot Extended BootWare |
|<5> Boot Backup Extended BootWare |
|<0> Reboot |
============================================================================
Ctrl+U: Access BASIC ASSISTANT MENU
Enter your choice(0-5):