F5000-cn160双主模式问题

同样的两组rbm配置，一组device running status都是active 另外一组备框就是standby，经查track的链路没有起来，重新配置之后删除rem group 重新配置后，该组rbm备框还是standby状态具体要怎么切换回双主模式双active 脚本如下 # remote-backup group backup-mode dual-active data-channel interface Route-Aggregation62 configuration sync-check interval 12 delay-time 30 adjust-cost bgp enable absolute 10000 track 1 track 2 local-ip 192.168.0.1 remote-ip 192.168.0.2 device-role primary # # remote-backup group backup-mode dual-active data-channel interface Route-Aggregation62 configuration sync-check interval 12 delay-time 30 adjust-cost bgp enable absolute 10000 track 1 track 2 local-ip 192.168.0.2 remote-ip 192.168.0.1 device-role secondary #