[H3C]ip http enable
Info: HTTP server has been started!
[H3C]inf
[H3C]int
[H3C]interface vla
[H3C]interface Vlan-interface 1
[H3C-Vlan-interface1]ip 192.168.0.58 255.255.255.0
^
% Unrecognized command found at '^' position.
[H3C-Vlan-interface1]ip address 192.168.0.58 255.255.255.0
[H3C-Vlan-interface1]qu
[H3C]lo
[H3C]local-user abc
New local user added.
[H3C-luser-abc]pa
[H3C-luser-abc]password sim
[H3C-luser-abc]password simple 123456
[H3C-luser-abc]se
[H3C-luser-abc]service-type web
^
% Unrecognized command found at '^' position.
[H3C-luser-abc]service-type ?
ftp FTP service type
lan-access LAN-ACCESS service type
portal Portal service type
ppp Specify user type to ppp
ssh Secure Shell service type
telnet TELNET service type
terminal TERMINAL service type
[H3C-luser-abc]service-type
^
% Incomplete command found at '^' position.
[H3C-luser-abc]qu
[H3C]dis v
[H3C]dis version
H3C Comware Platform Software
Comware Software, Version 5.20, Release 5116P20
Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C SecPath U200-C uptime is 0 week, 0 day, 0 hour, 26 minutes
CPU type: RMI XLS404 800MHz CPU
512M bytes DDR2 SDRAM Memory
32M bytes Flash Memory
247M bytes CF0 Card
PCB Version:Ver.B
Logic Version: 3.0
Basic BootWare Version: 1.32
Extend BootWare Version: 1.32
[FIXED PORT] CON (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/0 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/1 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/2 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/3 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[FIXED PORT] GE0/4 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0
[SUBCARD 1] NSQ1WLAN0 (Hardware)Ver.D, (Driver)1.0, (Cpld)1.0
[H3C]
(0)
最佳答案
service-type后面telnet跟terminal都加上,web就打开了
(0)
接网线的口还要划vlan吗 interface Vlan-interface1 ip address 192.168.1.1 255.255.255.0 # interface GigabitEthernet0/0 port link-mode route # interface GigabitEthernet0/1 port link-mode route # interface GigabitEthernet0/2 port link-mode route # interface GigabitEthernet0/3 port link-mode route # interface GigabitEthernet0/4 port link-mode route
你这不都是三层口吗
访问不了
可以约个时间远程协助一下吗
你这是防火墙,应该是ip https enable
还是原V5的 U200-C的安全设备
这台设备是支持web的 web:表示Web用户。
检查配置命令的权限是管理员3级别
[H3C-luser-abc]service-type ? 确实没有看到有web服务
ftp FTP service type
lan-access LAN-ACCESS service type
portal Portal service type
ppp Specify user type to ppp
ssh Secure Shell service type
telnet TELNET service type
terminal TERMINAL service type
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
你这是防火墙,应该是ip https enable