华三 3010E 路由配置问题

路由配置问题,  小白问题，高手略过，能给些具体指令最好

目前这样配置，交换部分和AC控制部分均可PING通外网

<POE_switch_200.252>ping 211.97.142.108

  PING 211.97.142.108: 56  data bytes, press CTRL_C to break

    Reply from 211.97.142.108: bytes=56 Sequence=1 ttl=58 time=11 ms

    Reply from 211.97.142.108: bytes=56 Sequence=2 ttl=58 time=10 ms

    Reply from 211.97.142.108: bytes=56 Sequence=3 ttl=58 time=10 ms

    Reply from 211.97.142.108: bytes=56 Sequence=4 ttl=58 time=12 ms

    Reply from 211.97.142.108: bytes=56 Sequence=5 ttl=58 time=11 ms

  --- 211.97.142.108 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 10/10/12 ms

<POE_switch_200.252>display ip routing-table 211.97.142.108

Routing Table : Public

Summary Count : 1

Destination/Mask    Proto  Pre  Cost         NextHop         Interface

0.0.0.0/0           Static 60   0            192.168.1.1     Vlan11

<POE_switch_200.252>

问题：接入AC的设备（如PC，AP）自动取得IP后，只能PING通内网，192.168.1.254 192.168.1.252，却PING不通192.168.1.1,上不了网。

是少了什么路由吗