juniper防火墙配置如下
请问如何在华三防火墙实现如下操作,华三防火墙做静态NAT, 版本version 7.1.064, Release 9360P27
set security policies from-zone inside to-zone outside policy in2out match source-address Widdn
set security policies from-zone inside to-zone outside policy in2out match destination-address ismg
set security policies from-zone inside to-zone outside policy in2out match application mplsnatapp
set security policies from-zone inside to-zone outside policy in2out then permit
set security policies from-zone outside to-zone inside policy out2in match source-address ismg
set security policies from-zone outside to-zone inside policy out2in match destination-address Widdn
set security policies from-zone outside to-zone inside policy out2in match application mplsnatapp
set security policies from-zone outside to-zone inside policy out2in then permit
set firewall filter telnetctrl term 10 from source-address 10.132.11.16/28
set firewall filter telnetctrl term 10 then accept
set firewall filter telnetctrl term 20 from protocol tcp
set firewall filter telnetctrl term 20 from destination-port telnet
set firewall filter telnetctrl term 20 then discard
set firewall filter telnetctrl term 30 then accept
set applications application mplsnatapp01 protocol tcp
set applications application mplsnatapp01 destination-port 20
set applications application mplsnatapp02 protocol tcp
set applications application mplsnatapp02 destination-port 21
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论