WAP662黄灯常量,无射频发射。参考社区里的《云AP版本丢失亮黄灯恢复办法》,在官网下载最新固件WAP662-WPT330-R2126-OASIS,按文档里的说明刷了bootware固件和系统固件,结果还是启动不了。console输出如下,好像是加载不了云ap的系统固件啊。请教一下如何处理?
****************************************************************************
* *
* BootWare, Version 1.05 *
* *
****************************************************************************
Compiled Date : Nov 18 2023
Memory Type : DDR3 SDRAM
Memory Size : 256MB
Flash Size : 16MB
PCB Version : A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Protocol (FTP or TFTP) : tftp
Load File Name : wap662-ramdisk.bin
Target File Name : wap662-ramdisk.bin
Server IP Address : 192.168.1.123
Local IP Address : 192.168.1.1
Gateway IP Address : 0.0.0.0
Loading...Failed!
System restart now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
==========================<Enter Ethernet SubMenu>==========================
| |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-4): 1
Loading.....................................................................
............................................................................
............................................................................
.........................................Done.
13304832 bytes downloaded!
starting...[ 0.000000] Linux version 4.4.198 (l20704@t19804-R4800-G2) (gcc version 5.4.0 (LEDE GCC 5.4.0 unknown) ) #0 SMP Thu Mar 28 10:54:44 UTC 2024
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is MediaTek MT7621 RFB (802.11ax,SNOR)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] PERCPU: Embedded 10 pages/cpu @81edd000 s8704 r8192 d24064 u40960
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: cOnsole=none rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=000096c0
[ 0.000000] Readback ErrCtl register=000096c0
[ 0.000000] Memory: 246548K/262144K available (6947K kernel code, 4021K rwdata, 1656K rodata, 228K init, 234K bss, 15596K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007771] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.070397] pid_max: default: 32768 minimum: 301
[ 0.075101] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.081626] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.454778] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 1.454787] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 1.454797] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 1.454943] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.177555] Synchronize counters for CPU 1: done.
[ 1.232104] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 1.232111] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 1.232118] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 1.232191] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.268047] Synchronize counters for CPU 2: done.
[ 1.322292] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 1.322298] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 1.322305] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 1.322390] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.353223] Synchronize counters for CPU 3: done.
[ 0.357979] Brought up 4 CPUs
[ 0.365643] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.375430] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.381721] pinctrl core: initialized pinctrl subsystem
[ 0.388275] NET: Registered protocol family 16
[ 0.401060] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.406667] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.412295] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.418339] mt7621-pci 1e140000.pcie: Failed to get gpio for PCIe1
[ 0.424482] mt7621-pci 1e140000.pcie: Failed to get gpio for PCIe2
[ 0.630749] PCIe port 2 link down
[ 0.633977] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[ 0.649739] PCI host bridge to bus 0000:00
[ 0.653780] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 0.660627] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
[ 0.667419] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.674174] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.682818] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.690748] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.700069] pci 0000:00:00.0: BAR 9: assigned [mem 0x60000000-0x601fffff pref]
[ 0.707218] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x603fffff pref]
[ 0.714360] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[ 0.721116] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[ 0.727847] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit pref]
[ 0.735561] pci 0000:01:00.0: BAR 2: assigned [mem 0x60100000-0x60103fff 64bit pref]
[ 0.743235] pci 0000:01:00.0: BAR 4: assigned [mem 0x60104000-0x60104fff 64bit pref]
[ 0.750935] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.755835] pci 0000:00:00.0: bridge window [mem 0x60000000-0x601fffff pref]
[ 0.763032] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit pref]
[ 0.770703] pci 0000:02:00.0: BAR 2: assigned [mem 0x60300000-0x60303fff 64bit pref]
[ 0.778414] pci 0000:02:00.0: BAR 4: assigned [mem 0x60304000-0x60304fff 64bit pref]
[ 0.786085] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.791010] pci 0000:00:01.0: bridge window [mem 0x60200000-0x603fffff pref]
[ 0.799831] clocksource: Switched to clocksource GIC
[ 0.806721] NET: Registered protocol family 2
[ 0.811698] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.818581] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.825008] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.831358] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.837109] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.843647] NET: Registered protocol family 1
[ 0.862195] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.867946] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.880820] io scheduler noop registered
[ 0.884662] io scheduler deadline registered (default)
[ 0.889826] H3C_PROC: successed to creat the config file.
[ 0.895241] H3C:stainfo netlink sock create success
[ 0.900252] h3c sta connect work queue init succed.
[ 0.906658] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 0.914305] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33, base_baud = 3125000) is a 16550A
[ 0.923780] 1e000d00.uartfull: ttyS1 at MMIO 0x1e000d00 (irq = 34, base_baud = 3125000) is a 16550A
[ 0.933245] 1e000e00.uartfull: ttyS2 at MMIO 0x1e000e00 (irq = 35, base_baud = 3125000) is a 16550A
[ 0.945184] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
[ 0.950602] 10 ofpart partitions found on MTD device spi32766.0
[ 0.956412] Creating 10 MTD partitions on "spi32766.0":
[ 0.961630] 0x000000000000-0x000001000000 : "ALL"
[ 0.967621] 0x000000000000-0x000000040000 : "basic"
[ 0.973735] 0x000000040000-0x000000100000 : "ext"
[ 0.979573] 0x000000100000-0x000000110000 : "flag"
[ 0.985615] 0x000000110000-0x000000120000 : "excp"
[ 0.991643] 0x000000120000-0x000000130000 : "manu"
[ 0.997585] 0x000000130000-0x000000150000 : "Factory"
[ 1.003927] 0x000000150000-0x000000190000 : "reserved"
[ 1.010278] 0x000000190000-0x000000fe0000 : "firmware"
[ 1.026680] no valid FIT image found in "firmware" at offset 0
[ 1.032489] no valid FIT image found in "firmware" at offset 10000
[ 1.038619] no valid FIT image found in "firmware" at offset 20000
[ 1.044776] no valid FIT image found in "firmware" at offset 30000
[ 1.050940] no valid FIT image found in "firmware" at offset 40000
[ 1.057070] no valid FIT image found in "firmware" at offset 50000
[ 1.063229] no valid FIT image found in "firmware" at offset 60000
[ 1.069359] no valid FIT image found in "firmware" at offset 70000
[ 1.075516] no valid FIT image found in "firmware" at offset 80000
[ 1.081668] no valid FIT image found in "firmware" at offset 90000
[ 1.087798] no valid FIT image found in "firmware" at offset a0000
[ 1.093955] no valid FIT image found in "firmware" at offset b0000
[ 1.100112] no valid FIT image found in "firmware" at offset c0000
[ 1.106242] no valid FIT image found in "firmware" at offset d0000
[ 1.112399] no valid FIT image found in "firmware" at offset e0000
[ 1.118529] no valid FIT image found in "firmware" at offset f0000
……………………
此处删掉若干雷同的报错
……………………
[ 2.421272] no valid FIT image found in "firmware" at offset e00000
[ 2.427488] no valid FIT image found in "firmware" at offset e10000
[ 2.433734] no valid FIT image found in "firmware" at offset e20000
[ 2.439975] no valid FIT image found in "firmware" at offset e30000
[ 2.446192] no valid FIT image found in "firmware" at offset e40000
[ 2.452380] no rootfs found after FIT image in "firmware"
[ 2.514742] 0x000000fe0000-0x000001000000 : "sfg"
[ 2.521168] libphy: Fixed MDIO Bus: probed
[ 2.580080] libphy: mdio: probed
[ 2.583767] mtk_soc_eth 1e100000.ethernet: generated random MAC address 82:cc:e8:9d:e2:83
[ 2.592327] mtk_soc_eth 1e100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 2.603391] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 10
[ 2.611729] mtk_soc_eth 1e100000.ethernet: generated random MAC address e2:98:3b:b1:97:07
[ 2.620302] mtk_soc_eth 1e100000.ethernet: connected mac 1 to PHY at fixed-0:01 [uid=00000000, driver=Generic PHY]
[ 2.631256] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 10
[ 2.639840] register mt_drv
[ 2.642735] <--mt7916_hif_init()
[ 2.646383] Rx[0] Ring: total 24576 bytes allocated
[ 2.655495] Rx[1] Ring: total 16384 bytes allocated
[ 2.660415] <-- pci_alloc_tx_rx_ring_mem, Status=0
[ 2.697464]
[ 2.697464]
[ 2.697464] === pAd = c0301000, size = 13305728 ===
[ 2.697464]
[ 2.708224] <-- RTMPAllocAdapterBlock, Status=0
[ 2.712711] PCI CSRBaseAddress =0xc0200000, csr_addr=0xc0200000!
[ 2.718633] RTMPInitPCIeDevice():device_id=0x7915
[ 2.723313] mt7915_init()-->
[ 2.726140] Use the default iPAiLNA bin image!
[ 2.730642] <--mt7915_init()
[ 2.733576] H3c ratelimit module init success.wdev_init(caller:RTMP_COM_IoctlHandle+0x39c/0x1aa0), wdev(0)
[ 2.744160] Rx[0] Ring: total 24576 bytes allocated
[ 2.749096] Rx[1] Ring: total 24576 bytes allocated
[ 2.756206] Rx[2] Ring: total 8192 bytes allocated
[ 2.765188] Rx[3] Ring: total 16384 bytes allocated
[ 2.772263] Rx[4] Ring: total 8192 bytes allocated
[ 2.777002] <-- pci_alloc_tx_rx_ring_mem, Status=0
[ 2.783590] mt7621_wdt 1e000100.wdt: Initialized
[ 2.789653] NET: Registered protocol family 10
[ 2.795567] NET: Registered protocol family 17
[ 2.800018] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.812574] h3ccfg_init_br_oauth: netlink kernel create successfully!
[ 2.818917] h3ccfg_init_br_denylist: netlink kernel create successfully!
[ 2.825664] 8021q: 802.1Q VLAN Support v1.8
[ 2.830494] bootconsole [early0] disabled
————————————————————————————————————
谢谢楼上回复,直接加载后貌似找不到固件啊?
CTRL+F格式后再上传,还是提示“加载失败”,但是格式化后加载本地版本可以:
————————————————————————————————————————————
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
你好,加载本地版本成功,亮蓝灯。但是重启就还是版本丢失
胖版本吗?
云版本的,现在选择“Download Image Program To SDRAM And Run”能注册,正常工作。但是重新启动还是注册不了,必须选择download to SDRAM才能启动。
这个型号没有云版本啊,具体型号发一下
就是小贝wap662
这个没有fat版本