WAP662黄灯常量,无射频发射。参考社区里的《云AP版本丢失亮黄灯恢复办法》,在官网下载最新固件WAP662-WPT330-R2126-OASIS,按文档里的说明刷了bootware固件和系统固件,结果还是启动不了。console输出如下,好像是加载不了云ap的系统固件啊。请教一下如何处理?
****************************************************************************
* *
* BootWare, Version 1.05 *
* *
****************************************************************************
Compiled Date : Nov 18 2023
Memory Type : DDR3 SDRAM
Memory Size : 256MB
Flash Size : 16MB
PCB Version : A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Protocol (FTP or TFTP) : tftp
Load File Name : wap662-ramdisk.bin
Target File Name : wap662-ramdisk.bin
Server IP Address : 192.168.1.123
Local IP Address : 192.168.1.1
Gateway IP Address : 0.0.0.0
Loading...Failed!
System restart now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
////论坛里有位朋友说加载本地版本,选择1 “Download Image Program To SDRAM And Run”后,能启动亮蓝灯(提示见附后)。
但是正常重启后还是上面那个提示。
==========================<Enter Ethernet SubMenu>==========================
| |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-4): 1
Loading.....................................................................
............................................................................
.....................................................................................................................Done.
13304832 bytes downloaded!
starting...[ 0.000000] Linux version 4.4.198 (l20704@t19804-R4800-G2) (gcc version 5.4.0 (LEDE GCC 5.4.0 unknown) ) #0 SMP Thu Mar 28 10:54:44 UTC 2024
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is MediaTek MT7621 RFB (802.11ax,SNOR)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] PERCPU: Embedded 10 pages/cpu @81edd000 s8704 r8192 d24064 u40960
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: cOnsole=none rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=000096c0
[ 0.000000] Readback ErrCtl register=000096c0
[ 0.000000] Memory: 246548K/262144K available (6947K kernel code, 4021K rwdata, 1656K rodata, 228K init, 234K bss, 15596K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007768] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.070389] pid_max: default: 32768 minimum: 301
[ 0.075084] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.081608] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 3.706572] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 3.706581] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 3.706591] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 3.706733] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.177335] Synchronize counters for CPU 1: done.
[ 3.484261] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 3.484268] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 3.484274] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 3.484346] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.267794] Synchronize counters for CPU 2: done.
[ 3.574448] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 3.574455] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 3.574461] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 3.574546] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.352970] Synchronize counters for CPU 3: done.
[ 0.357726] Brought up 4 CPUs
[ 0.365377] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.375166] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.381458] pinctrl core: initialized pinctrl subsystem
[ 0.388034] NET: Registered protocol family 16
[ 0.400782] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.406388] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.412014] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.418051] mt7621-pci 1e140000.pcie: Failed to get gpio for PCIe1
[ 0.424192] mt7621-pci 1e140000.pcie: Failed to get gpio for PCIe2
[ 0.630654] PCIe port 2 link down
[ 0.633884] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[ 0.649594] PCI host bridge to bus 0000:00
[ 0.653663] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 0.660440] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
[ 0.667279] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.674005] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.684015] pci 0000:00:00.0: BAR 9: assigned [mem 0x60000000-0x601fffff pref]
[ 0.691133] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x603fffff pref]
[ 0.698323] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[ 0.705048] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[ 0.711802] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit pref]
[ 0.719489] pci 0000:01:00.0: BAR 2: assigned [mem 0x60100000-0x60103fff 64bit pref]
[ 0.727190] pci 0000:01:00.0: BAR 4: assigned [mem 0x60104000-0x60104fff 64bit pref]
[ 0.734865] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.739788] pci 0000:00:00.0: bridge window [mem 0x60000000-0x601fffff pref]
[ 0.746950] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit pref]
[ 0.754665] pci 0000:02:00.0: BAR 2: assigned [mem 0x60300000-0x60303fff 64bit pref]
[ 0.762343] pci 0000:02:00.0: BAR 4: assigned [mem 0x60304000-0x60304fff 64bit pref]
[ 0.770039] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.774937] pci 0000:00:01.0: bridge window [mem 0x60200000-0x603fffff pref]
[ 0.783757] clocksource: Switched to clocksource GIC
[ 0.790577] NET: Registered protocol family 2
[ 0.795567] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.802453] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.808878] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.815216] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.820966] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.827495] NET: Registered protocol family 1
[ 0.846146] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.851901] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.865207] io scheduler noop registered
[ 0.869047] io scheduler deadline registered (default)
[ 0.874187] H3C_PROC: successed to creat the config file.
[ 0.879634] H3C:stainfo netlink sock create success
[ 0.884626] h3c sta connect work queue init succed.
[ 0.891020] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 0.898449] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33, base_baud = 3125000) is a 16550A
[ 0.907836] 1e000d00.uartfull: ttyS1 at MMIO 0x1e000d00 (irq = 34, base_baud = 3125000) is a 16550A
[ 0.917201] 1e000e00.uartfull: ttyS2 at MMIO 0x1e000e00 (irq = 35, base_baud = 3125000) is a 16550A
[ 0.928809] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
[ 0.934260] 10 ofpart partitions found on MTD device spi32766.0
[ 0.940070] Creating 10 MTD partitions on "spi32766.0":
[ 0.945278] 0x000000000000-0x000001000000 : "ALL"
[ 0.951236] 0x000000000000-0x000000040000 : "basic"
[ 0.957332] 0x000000040000-0x000000100000 : "ext"
[ 0.963186] 0x000000100000-0x000000110000 : "flag"
[ 0.969216] 0x000000110000-0x000000120000 : "excp"
[ 0.975243] 0x000000120000-0x000000130000 : "manu"
[ 0.981199] 0x000000130000-0x000000150000 : "Factory"
[ 0.987491] 0x000000150000-0x000000190000 : "reserved"
[ 0.993884] 0x000000190000-0x000000fe0000 : "firmware"
[ 1.010317] no valid FIT image found in "firmware" at offset 0
[ 1.016129] no valid FIT image found in "firmware" at offset 10000
[ 1.022260] no valid FIT image found in "firmware" at offset 20000
[ 1.028410] no valid FIT image found in "firmware" at offset 30000
[ 1.034555] no valid FIT image found in "firmware" at offset 40000
[ 1.040686] no valid FIT image found in "firmware" at offset 50000
[ 1.046835] no valid FIT image found in "firmware" at offset 60000
[ 1.052965] no valid FIT image found in "firmware" at offset 70000
[ 1.059115] no valid FIT image found in "firmware" at offset 80000
[ 1.065260] no valid FIT image found in "firmware" at offset 90000
[ 1.071390] no valid FIT image found in "firmware" at offset a0000
[ 1.077540] no valid FIT image found in "firmware" at offset b0000
[ 1.083670] no valid FIT image found in "firmware" at offset c0000
[ 1.089822] no valid FIT image found in "firmware" at offset d0000
[ 1.095969] no valid FIT image found in "firmware" at offset e0000
[ 1.102099] no valid FIT image found in "firmware" at offset f0000
[ 1.108323] 3 fit-fw partitions found on MTD device firmware
[ 1.113901] 0x000000190000-0x000000290000 : "btwbkup"
[ 1.120123] 0x000000290000-0x0000005e0000 : "kernel"
[ 1.126196] 0x0000005e0000-0x000000fe0000 : "rootfs"
[ 1.132140] mtd: device 11 (rootfs) set to be root filesystem
[ 1.137926] 1 squashfs-split partitions found on MTD device rootfs
[ 1.144026] 0x000000e40000-0x000000fe0000 : "rootfs_data"
[ 1.150520] 0x000000fe0000-0x000001000000 : "sfg"
[ 1.156780] libphy: Fixed MDIO Bus: probed
[ 1.213971] libphy: mdio: probed
[ 1.217669] mtk_soc_eth 1e100000.ethernet: generated random MAC address b2:0e:81:65:50:eb
[ 1.226219] mtk_soc_eth 1e100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.237225] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 10
[ 1.245562] mtk_soc_eth 1e100000.ethernet: generated random MAC address b2:63:51:d4:b0:5a
[ 1.254187] mtk_soc_eth 1e100000.ethernet: connected mac 1 to PHY at fixed-0:01 [uid=00000000, driver=Generic PHY]
[ 1.265249] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 10
[ 1.273801] register mt_drv
[ 1.276684] <--mt7916_hif_init()
[ 1.280342] Rx[0] Ring: total 24576 bytes allocated
[ 1.289458] Rx[1] Ring: total 16384 bytes allocated
[ 1.294351] <-- pci_alloc_tx_rx_ring_mem, Status=0
[ 1.331652]
[ 1.331652]
[ 1.331652] === pAd = c0301000, size = 13305728 ===
[ 1.331652]
[ 1.342383] <-- RTMPAllocAdapterBlock, Status=0
[ 1.346853] PCI CSRBaseAddress =0xc0200000, csr_addr=0xc0200000!
[ 1.352789] RTMPInitPCIeDevice():device_id=0x7915
[ 1.357464] mt7915_init()-->
[ 1.360297] Use the default iPAiLNA bin image!
[ 1.364793] <--mt7915_init()
[ 1.367728] H3c ratelimit module init success.wdev_init(caller:RTMP_COM_IoctlHandle+0x39c/0x1aa0), wdev(0)
[ 1.378269] Rx[0] Ring: total 24576 bytes allocated
[ 1.383219] Rx[1] Ring: total 24576 bytes allocated
[ 1.390261] Rx[2] Ring: total 8192 bytes allocated
[ 1.399174] Rx[3] Ring: total 16384 bytes allocated
[ 1.406176] Rx[4] Ring: total 8192 bytes allocated
[ 1.410912] <-- pci_alloc_tx_rx_ring_mem, Status=0
[ 1.417732] mt7621_wdt 1e000100.wdt: Initialized
[ 1.424147] NET: Registered protocol family 10
[ 1.430166] NET: Registered protocol family 17
[ 1.434642] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.447193] h3ccfg_init_br_oauth: netlink kernel create successfully!
[ 1.453536] h3ccfg_init_br_denylist: netlink kernel create successfully!
[ 1.460244] 8021q: 802.1Q VLAN Support v1.8
[ 1.465119] bootconsole [early0] disabled
无
(0)
选择1 “Download Image Program To SDRAM And Run”后,能启动亮蓝灯(提示见附后)。这时也能注册云平台上线,能发射射频正常接入。
但是本地AP自己启动起不来,必须选择1下载到SDRAM才能运行😓
打过400,他们让我刷机
(0)
暂无评论
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论