S6850+IRF配置

core1

<H3C>system-view

[H3C]sysname core1

[core1]interface range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50

[core1-if-range]shutdown

[core1-if-range]quit

[core1]irf-port 1/1

[core1-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/49

[core1-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/50

[core1-irf-port1/1]quit

[core1]display irf configuration 

 MemberID  NewID        IRF-Port1                        IRF-Port2

 1                  1        Ten-GigabitEthernet1/0/49       disable

                               Ten-GigabitEthernet1/0/50

[core1]interface Ten-GigabitEthernet 1/0/49

[core1-Ten-GigabitEthernet1/0/49]undo shutdown

[core1-Ten-GigabitEthernet1/0/49]quit

[core1]interface Ten-GigabitEthernet 1/0/50

[core1-Ten-GigabitEthernet1/0/50]undo shutdown

[core1-Ten-GigabitEthernet1/0/50]quit

[core1]irf-port-configuration active

core2

<H3C>system-view

[H3C]sysname core2

[core2]irf member 1 renumber 2

[core2]quit

<core2>reboot

<core2>system-view

[core2]interface range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50

[core2-if-range]shutdown

[core2-if-range]quit

[core2]irf-port 2/2

[core2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/49

You must perform the following tasks for a successful IRF setup:

Save the configuration after completing IRF configuration.

Execute the "irf-port-configuration active" command to activate the IRF ports.

[core2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/50

[core2-irf-port2/2]quit

[core2]display irf configuration

 MemberID NewID    IRF-Port1                     IRF-Port2

 2               2             disable                       Ten-GigabitEthernet2/0/49

                                                                  Ten-GigabitEthernet2/0/50

[core2]interface range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50

[core2-if-range]undo shutdown

[core2-if-range]quit

[core2]save

[core2]irf-port-configuration active

按照以上配置，重启后不成功，求大神指点指点