最佳答案
如果是fit模式的话，需要搭配控制器使用。如果要单独使用，需要切换成fat模式，进命令行ap-mode fat切换然后通过web和命令可以配置
来当无线路由器使用的
- 2024-09-11回答
- 评论(0)
- 举报
-
(0)
暂无评论
您好，瘦AP没办法直接转，需要通过console去刷胖AP版本
1.1 适用产品系列
本手册适用于如下产品：比如WA4320H-SI、WAP711H、WAP712H、WAP712C-LI、WA4320H等WA4300系列云AP。
1.1.1 AP瘦切胖配置案例（Bootrom）
操作风险提示：AP瘦切胖有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。命令行升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器）
将软件版本下载到设备FLASH内，然后通过命令行加载Bootrom版本，再加载主机软件版本，加载时输入的文件名一定要一致，建议复制黏贴，然后升级过程中避免断电重启操作。
1、先从官网下载WA4300云AP的胖版本，本案例以WA4320H-SI举例
https://www.h3c.com/cn/d_201909/1225207_30005_40.htm
下载压缩包WA4300S-WPT330-E1105-OASIS.zip，解压生成bin文件，把从官网下载的云AP版本文件改成wa4300s-oasis.bin，放到电脑桌面上。
2、电脑通过网线连接到ap的一个网口，电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把bin软件版本放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定。
3、console口上传版本，console口登录方法参考《1.03 设备管理-Console登录方法》
在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单。
Enter your choice(0-9): ystem is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.........................Done!
****************************************************************************
* *
* H3C WA4320H-SI BootWare, Version 1.07 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Jun 19 2017
CPU Type : ATHEROS AR9531
CPU L1 Cache : 32KB
CPU Clock Speed : 650MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 450MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
3.1、升级扩展bootrom版本
要求扩展boot必须为7.13。版本文件中可获取.如果当前版本已经为7.13，直接忽略此步骤。
======================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 7 //进入bootware子菜单
===================================================
|Note:the operating device is flash |
|<1> Update BootWare By Serial |
|<2> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-2): 2 //设置更新bootware方式通过网线
======================================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 4 //修改以太口参数
====================================================
|Note: "." = Clear field. |
| "-" = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wap712h_art_v5.bin
:apwtu41039757_v7.13.btw //bootware版本名称, 如boot版本已经是V7.13了，可忽略本步骤，继续升级bin版本
Target File Name :wap712h_art_v5.bin
:apwtu41039757_v7.13.btw
Server IP Address :192.168.1.251 192.168.0.1 //电脑ip地址
Local IP Address :192.168.1.2 192.168.0.19 //配置和电脑同网段任意地址
Gateway IP Address :0.0.0.0
======================================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 1 //更新bootware版本
Loading..........Done!
381952 bytes downloaded!
Updating Basic BootWare? [Y/N]Y //手工输入“Y”
Updating Basic BootWare..........Done!
Updating Extend BootWare? [Y/N]Y //手工输入“Y”
Updating Extend BootWare...........Done!
3.2、升级bin版本
升级完扩展boot之后重启设备（可以看到此时扩展boot已经是7.13版本），进扩展boot升级设备版本。
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing..........................Done.
****************************************************************************
* *
* H3C WA4320H-SI BootWare, Version 7.13 *
* *
****************************************************************************
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.
Compiled Date : Jul 31 2019
CPU Type : ATHEROS AR9531
CPU L1 Cache : 32KB
CPU Clock Speed : 650MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 450MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
上传版本文件
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3 //进入以太口子菜单
====================================================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Download Files(*.*) |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
============================================================================
Enter your choice(0-4): 4 //修改以太口参数
====================================================
|Note: "." = Clear field. |
| "-" = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :apwtu41039757_v7.13.btw
:wa4300s-oasis.bin //此处注意修改版本文件名称,为wa4300s-oasis.bin
Target File Name :apwtu41039757_v7.13.btw
:wa4300s-oasis.bin //此处注意修改版本文件名称,为wa4300s-oasis.bin
Server IP Address :192.168.0.1 //电脑ip地址
Local IP Address :192.168.0.19 //配置和电脑同网段任意地址
Subnet Mask :0.0.0.0
Gateway IP Address :0.0.0.0
====================================================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Download Files(*.*) |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
============================================================================
Enter your choice(0-4): 3 //更新版本
Loading.....................................................................
............................................................................
............................................................................
.................................................Done.
13698048 bytes downloaded!
Saving file flash:/wa4300s-oasis.bin .......................................
............................................................................
............................................................................
............................................................................
...........................................................Done.
切换ap模式
====================================================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Download Files(*.*) |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
============================================================================
Enter your choice(0-4): 0
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
Please select the new mode
Current mode is Fit
============================================================================
|NO. Mode |
|1 Oasis Mode |
|2 Fit Mode |
|0 Exit |
============================================================================
Enter your choice(0-2):1 //切换为云模式
This operation takes several minutes.Please wait...
Changed to Oasis mode successfully! Please reboot the system now!
切换完成后重启设备
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0 //重启
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing..........................Done.
****************************************************************************
* *
* H3C WA4320H-SI BootWare, Version 7.13 *
* *
****************************************************************************
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.
Compiled Date : Jul 31 2019
CPU Type : ATHEROS AR9531
CPU L1 Cache : 32KB
CPU Clock Speed : 650MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 450MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
starting...
配置关键点
配置关键点：
1、第三步选择Download Files，否则会出现报错；
2、需要上传版本文件之后再切换ap模式；
3、刷完版本之后只能通过web管理；
4、云ap里，只有WAP712C-LI 型号，是要用7.17的boot的, 该版本适配的其他款型均用7.13的boot；
5、严格按照案例中操作步骤执行，关键注意先上传版本文件之后再切换ap模式；
6、把从官网下载的云AP版本文件改成wa4300s-oasis.bin；
7、操作完成后设备启动会停留在starting…阶段，实际可能已经完成，如果能搜索到SSID为H3C_XXXXXX（mac后6位）的SSID说明已经转换完成并启动。
云AP是Fat AP。初次使用云AP，给云AP上电后，云AP会默认开启4个无线服务：
l
l
- 2024-09-11回答
- 评论(0)
- 举报
-
(0)
暂无评论
在AC上通过命令行开启AP 远程登录权限
[H3C]probe
[H3C-probe]wlan ap-execute ap1 exec-console enable
- 2024-09-11回答
- 评论(0)
- 举报
-
(0)
暂无评论
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论