msr2600-10 ipv6怎么设置

[H3C]display current-configuration interface GigabitEthernet0/0

#

interface GigabitEthernet0/0

 port link-mode route

 nat outbound

 undo ipv6 nd ra halt

 ipv6 address auto

 ip address dhcp-alloc

 ip flow-ordering external

#

return

[H3C]display ipv6 interface GigabitEthernet0/0

GigabitEthernet0/0 current state :UP

Line protocol current state :UP

IPv6 is enabled, link-local address is FE80::72F9:6DFF:FE6D:8ADC

  No global unicast address configured

  Joined group address(es):

    FF02::1:FF6D:8ADC

    FF02::2

    FF02::1

  MTU is 1500 bytes

  ND DAD is enabled, number of DAD attempts: 1

  ND reachable time is 30000 milliseconds

  ND retransmit interval is 3000 milliseconds

  ND advertised reachable time is 0 milliseconds

  ND advertised retransmit interval is 0 milliseconds

  ND router advertisements are sent every 600 seconds

  ND router advertisements live for 1800 seconds

  Hosts use stateless autoconfig for addresses

IPv6 Packet statistics:

  InReceives:                   1421

  InTooShorts:                  0

  InTruncatedPkts:              0

 设置了 ipv6 address auto还是No global unicast address configured。