我有一款H3C WA4320I-ACN-FIT无线AP

软件版本下载地址：http://www.h3c.com/cn/Service/Document_Software/Software_Download/IP_Wlan/AP/H3C_WA4300/

用户名：yx800      密码：01230123    

操作步骤：

1.电脑网卡设置为：192.168.0.1/255.255.255.0 ，打开TFTP服务器，把软件版本放到tftp的根目录下

2.在AP重启的时候按住Ctrl+B进入设备的bootroom菜单，

===============<EXTEND-BOOTWARE MENU>=========================

|<1> Boot System

|<2> Enter Serial SubMenu

|<3> Enter Ethernet SubMenu

|<4> File Control

|<5> Restore to Factory Default Configuration

|<6> Skip Current System Configuration

|<7> BootWare Operation Menu

|<8> Clear Super Password

|<9> Storage Device Operation

|<0> Reboot

此处选择 3 （如果空间不够用，线按ctrl+F格式化，再选择3）

3.然后会进入这个菜单：

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And Run

|<2> Update Main Application File

|<3> Update Backup Application File

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

|<0> Exit To Main Menu

选择 5

4，然后出现下边的界面，按如下设置：

===========<ETHERNET PARAMETER SET>=====================

|Note:       '.' = Clear field.

|            '-' = Go to previous field.

|          Ctrl+D = Quit.

===============================================================

Protocol (FTP or TFTP) : TFTP

//忽略输出内容，直接输入TFTP，然后回车

Load File Name         :wa4300_fat.bin

//忽略输出内容，直接输入wa2600a_fat.bin，然后回车

Target File Name       :wa4300_fat.bin  

//忽略输出内容，直接输入wa4300_fat.bin，然后回车

Server IP Address      :192.168.0.1   

//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车

Local IP Address       :192.168.0.50

//忽略输出内容，直接输入呵电脑主机的ip同一网段，比如192.168.0.50，然后回车

Gateway IP Address     :0.0.0.0

//忽略输出内容，直接回车

备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达，能ping通

=============<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And

|<2> Update Main Application File

|<3> Update Backup Application File

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

|<0> Exit To Main Menu

|<Ensure The Parameter Be Modified Before Downloading!>

========================================================

回车后的界面选择2，开示上传文件

Enter your choice(0-5): 2   //此时可以看到TFTP服务器上数据上传的滚动

Loading.....................................................................

....................................Done!

上传成功后，选择 " 0 "，返回主界面

5，<1> Boot System

<2> Enter Serial SubMenu

<3> Enter Ethernet SubMenu

<4> File Control

<5> Restore to Factory Default Configuration

<6> Skip Current System Configuration

<7> BootWare Operation Menu

<8> Clear Super Password

<9> Storage Device Operation

<0>Reboot                                                                ==========================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

选择  4

Enter your choice(0-9): 4

=====================<File CONTROL>===============================

|Note:the operating device is flash

<1> Display All File(s)

<2> Set Application File type

<3> Delete File

<0> Exit To Main Menu

========================================================选择 2

Enter your choice(0-3): 2，然后会出现下边的界面：

Display all file(s) in flash:

'M' = MAIN      'B' = BACKUP      'S' = SECURE      'N/A' = NOT ASSIGNED

|NO. Size(B)   Time                 Type   Name                          

||1   9124864   Aug/08/2008 20:00:00 M      wa4300_fat.bin 

选择 1 将  wa4300_fat.bin设置成主启动文件，然后选择0返回主页面，再选择1，重启系统即可

能否告知TFTP服务器在哪下载？谢谢