AC+AP配置

在AC上直接AP上线就可以呀

您好，只要网络可达就可

可参考如下AC+AP的配置举例：

1.19.1  通过DHCP发现方式建立CAPWAP隧道配置举例

1. 组网需求

AP通过DHCP选项方式从DHCP server上获取AP和AC的IP地址，发现AC并与AC建立CAPWAP隧道连接。

2. 组网图

图1-3 通过DHCP发现方式建立CAPWAP隧道组网图

‌

3. 配置步骤

(1)     配置DHCP server

# 使能DHCP服务器功能。

<DHCP Server> system-view

[DHCP Server] dhcp enable

# 配置DHCP地址池1。

[DHCP Server] dhcp server ip-pool 1

[DHCP Server-dhcp-pool-1] network 1.1.1.0 mask 255.255.255.0

# 通过自定义选项的方式配置Option 43的内容，为AP指定AC的IP地址1.1.1.3，注意Option 43选项内容中最后四字节为01010103（1.1.1.3），即为AC的IP地址。

[DHCP Server-dhcp-pool-1] option 43 hex 800700000101010103

[DHCP Server-dhcp-pool-1] quit

[DHCP Server] quit

(2)     配置AC

# 配置AC的VLAN-interface 1的IP地址为1.1.1.3/24。

<AC> system-view

[AC] interface vlan-interface 1

[AC-Vlan-interface1] ip address 1.1.1.3 24

# 创建手工AP，名称为ap1，配置序列号为210235A1BSC123000050。

[AC] wlan ap ap1 model WA4320i-ACN

[AC-wlan-ap-ap1] serial-id 210235A1BSC123000050

[AC-wlan-ap-ap1] quit

# AP启动后，DHCP server会给AP自动分配IP地址1.1.1.2，同时由于Option 43选项携带AC的IP地址1.1.1.3。AP拥有了自动分配的本地IPv4地址和需要建立关联的AC的IP地址1.1.1.3，就会开始发现AC的过程并建立CAPWAP隧道。

4. 验证配置

# 查看AP的详细信息，可以看到AP与AC成功建立隧道连接并进入Run状态，发现方式为DHCP选项方式。

[AC] display wlan ap name ap1 verbose

AP name                       : ap1

AP ID                         : 1

AP group name                 : default-group

State                         : Run

Backup Type                   : Master

Online time                   : 0 days 1 hours 25 minutes 12 seconds

System up time                : 0 days 2 hours 22 minutes 12 seconds

Model                         : WA4320i-ACN

Region code                   : CN

Region code lock              : Disable

Serial ID                     : 210235A1BSC123000050

MAC address                   : 0AFB-423B-893C

IP address                    : 1.1.1.2

UDP control port number       : 26147

UDP data port number          : 26147

H/W version                   : Ver.C

S/W version                   : E2321

Boot version                  : 1.01

USB state                     : N/A

Power level                   : N/A

Power info                    : N/A

Description                   : wtp1

Priority                      : 4

Echo interval                 : 10 seconds

Echo count                    : 3 counts

Keepalive interval            : 10 seconds

Discovery-response wait-time  : 2 seconds

Statistics report interval    : 50 seconds

Fragment size (data)          : 1500

Fragment size (control)       : 1450

MAC type                      : Local MAC & Split MAC

Tunnel mode                   : Local Bridging & 802.3 Frame & Native Frame

CAPWAP>Discovery type                : DHCP

Retransmission count          : 3

Retransmission interval       : 5 seconds

Firmware upgrade              : Enabled

Sent control packets          : 1

Received control packets      : 1

Echo requests                 : 147

Lost echo responses           : 0

Average echo delay            : 3

Last reboot reason            : User soft reboot

Latest IP address             : 10.1.0.2

Current AC IP                 : N/A

Tunnel down reason            : Request wait timer expired

Connection count              : 1

Backup Ipv4                   : Not configured

Backup Ipv6                   : Not configured

Ctrl-tunnel encryption        : Disabled

Ctrl-tunnel encryption state  : Not encrypted

Tunnel encryption             : Disabled

>>LED mode                      : Normal

Remote configuration          : Enabled

AP type                       : Unknown

Radio 1:

    Basic BSSID               : 7848-59f6-3940

    State                     : Up

    Type                      : 802.11ac

    Antenna type              : internal

    Client dot11ac-only       : Disabled

    Client dot11n-only        : Disabled

    Channel bandwidth         : 20/40/80MHz

    Operating bandwidth       : 20/40/80MHz

    Secondary channel mode    : SCB

    Short GI for 20MHz        : Supported

    Short GI for 40MHz        : Supported

    Short GI for 80MHz        : Supported

    Short GI for 160MHz       : Not supported

    MIMO                      : Not Config

    Green-Energy-Management   : Disabled

    A-MSDU                    : Enabled

    A-MPDU                    : Enabled

    LDPC                      : Not Supported

    STBC                      : Supported

    Operational VHT-MCS Set:

        Mandatory             : Not configured

        Supported             : NSS1 0,1,2,3,4,5,6,7,8,9

                                NSS2 0,1,2,3,4,5,6,7,8,9

        Multicast             : Not configured

    Operational HT MCS Set:

        Mandatory             : Not configured

        Supported             : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,

                                10, 11, 12, 13, 14, 15

        Multicast             : Not configured

    Channel                   : 44(auto)

    Channel usage(%)          : 15

    Max power                 : 20 dBm

    Operational rate:

        Mandatory             : 6, 12, 24 Mbps

        Multicast             : Auto

        Supported             : 9, 18, 36, 48, 54 Mbps

        Disabled              : Not configured

    Distance                  : 1 km

    ANI                       : Enabled

    Fragmentation threshold   : 2346 bytes

    Beacon interval           : 100 TU

    Protection threshold      : 2346 bytes

    Long retry threshold      : 4

    Short retry threshold     : 7

    Frame aging time in cache : 2000 ms

    Noise floor               : -102 dBm

    Smart antenna             : Enabled

    Smart antenna policy      : Auto

    Protection mode           : rts-cts

    MU-TxBF                   : Enabled

    SU-TxBF                   : Enabled

    Continuous mode           : N/A

    HT protection mode        : No protection

Radio 2:

    Basic BSSID               : 7848-59f6-3950

    State                     : Down

    Type                      : 802.11b

    Antenna type              : internal

    Client dot11n-only        : Disabled

    Channel bandwidth         : 20MHz

    Operating bandwidth       : 20MHz

    Secondary channel mode    : SCN

    Short GI for 20MHz        : Supported

    Short GI for 40MHz        : Supported

    A-MSDU                    : Enabled

    A-MPDU                    : Enabled

    LDPC                      : Not Supported

    STBC                      : Supported

    Operational HT MCS Set:

        Mandatory             : Not configured

        Supported             : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,

                                10, 11, 12, 13, 14, 15

        Multicast             : Not configured

    Channel                   : 5(auto)

    Channel usage(%)          : 0

    Max power                 : 20 dBm

    Preamble type             : Short

    Operational rate:

        Mandatory             : 1, 2, 5.5, 11 Mbps

        Multicast             : Auto

        Supported             : 6, 9, 12, 18, 24, 36, 48, 54 Mbps

        Disabled              : Not configured

    Distance                  : 1 km

    ANI                       : Enabled

    Fragmentation threshold   : 2346 bytes

    Beacon interval           : 100 TU

    Protection threshold      : 2346 bytes

    Long retry threshold      : 4

    Short retry threshold     : 7

    Frame aging time in cache : 2000 ms

    Noise floor               : 0 dBm

    Smart antenna             : Enabled

    Smart antenna policy      : Auto

    Protection mode           : rts-cts

    Continuous mode           : N/A

    HT protection mode        : No protection

三层注册，通过option43注册上线即可