两台S12508G-AF做M-Lag和一台S6520X-54XG-EI-G对接

两台S12508G-AF做M-Lag和一台S6520X-54XG-EI-G对接

M-lag两台12508困绑的两根线，对接一台6520捆绑的两根线，一直up，down。

S6520X-54XG-EI-G：是做分流器TAP用的配置如下

interface Bridge-Aggregation19

 link-aggregation mode dynamic

 undo stp enable

terface Ten-GigabitEthernet1/0/20

 qos apply tap policy p5 inbound 

 port link-aggregation group 19

interface Ten-GigabitEthernet1/0/19

 qos apply tap policy p5 inbound 

 port link-aggregation group 19

两台S12508G-AF配置均如下：

interface Bridge-Aggregation140

 link-aggregation mode dynamic

 port m-lag group 140

 mirroring-group 1 monitor-port

interface Ten-GigabitEthernet4/0/40

 port link-mode bridge

 port link-aggregation group 140

S12508G-AF日志显示如下：

%Oct 16 15:26:33:457 2024 WG-XCY-R51-C1-S12508G-01 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet4/0/40 changed to down.

%Oct 16 15:26:33:457 2024 WG-XCY-R51-C1-S12508G-01 LAGG/6/LAGG_ACTIVE: Member port XGE4/0/40 of aggregation group BAGG140 changed to the active state.

%Oct 16 15:26:33:466 2024 WG-XCY-R51-C1-S12508G-01 LAGG/6/LAGG_INACTIVE_OPERSTATE: Member port XGE4/0/40 of aggregation group BAGG140 changed to the inactive state, because the peer port did not have the Synchronization flag.

%Oct 16 15:26:33:476 2024 WG-XCY-R51-C1-S12508G-01 LAGG/6/LAGG_ACTIVE: Member port XGE4/0/40 of aggregation group BAGG140 changed to the active state.

%Oct 16 15:26:33:485 2024 WG-XCY-R51-C1-S12508G-01 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet4/0/40 changed to up.

%Oct 16 15:26:34:802 2024 WG-XCY-R51-C1-S12508G-01 M-LAG/6/MLAG_IFEVT_PEERIF_NOSELECTED: Peer M-LAG interface in M-LAG group 140 does not have Selected member ports.

%Oct 16 15:26:34:834 2024 WG-XCY-R51-C1-S12508G-01 M-LAG/6/MLAG_IFEVT_PEERIF_SELECTED: Peer M-LAG interface in M-LAG group 140 has Selected member ports.

S6520X-54XG-EI-G日志如下：

%Jun 10 23:50:30:795 2014 yby-wg-pub-FenLiuQi IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/19 changed to up.

%Jun 10 23:50:32:069 2014 yby-wg-pub-FenLiuQi LAGG/6/LAGG_INACTIVE_PARTNER: Member port XGE1/0/20 of aggregation group BAGG19 changed to the inactive state, because the aggregation configuration of its peer port is incorrect.

%Jun 10 23:50:32:072 2014 yby-wg-pub-FenLiuQi IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/20 changed to down.

%Jun 10 23:50:32:083 2014 yby-wg-pub-FenLiuQi LAGG/6/LAGG_ACTIVE: Member port XGE1/0/20 of aggregation group BAGG19 changed to the active state.

%Jun 10 23:50:32:106 2014 yby-wg-pub-FenLiuQi IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/20 changed to up.

%Jun 10 23:50:36:071 2014 yby-wg-pub-FenLiuQi LAGG/6/LAGG_INACTIVE_PARTNER: Member port XGE1/0/20 of aggregation group BAGG19 changed to the inactive state, because the aggregation configuration of its peer port is incorrect.

%Jun 10 23:50:36:084 2014 yby-wg-pub-FenLiuQi IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/20 changed to down.

%Jun 10 23:50:36:085 2014 yby-wg-pub-FenLiuQi LAGG/6/LAGG_ACTIVE: Member port XGE1/0/20 of aggregation group BAGG19 changed to the active state.

%Jun 10 23:50:36:132 2014 yby-wg-pub-FenLiuQi IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/20 changed to up.

%Jun 10 23:50:42:498 2014 yby-wg-pub-FenLiuQi LAGG/6/LAGG_INACTIVE_PARTNER: Member port XGE1/0/19 of aggregation group BAGG19 changed to the inactive state, because the aggregation configuration of its peer port is incorrect.

%Jun 10 23:50:42:498 2014 yby-wg-pub-FenLiuQi LAGG/6/LAGG_INACTIVE_PARTNER: Member port XGE1/0/20 of aggregation group BAGG19 changed to the inactive state, because the aggregation configuration of its peer port is incorrect.

%Jun 10 23:50:42:515 2014 yby-wg-pub-FenLiuQi IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/19 changed to down.

%Jun 10 23:50:42:515 2014 yby-wg-pub-FenLiuQi IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/20 changed to down.