1.进入slot0
2.保存配置提示没有足够的空间保存配置
3.查看dir flash:/什么也没有
slot 0版本信息如下:
H3C Comware Platform Software
Comware Software, Version 5.20, Release 2607P49
Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C WX5540E-LSW uptime is 0 week, 3 days, 2 hours, 21 minutes
H3C WX5540E-LSW with 2 Processors
1024M bytes DDR3
16M bytes Nor Flash Memory
Config Register points to Nor Flash
Hardware Version is Ver.B
CPLDA Version is 006, CPLDB Version is 004
BootRom Version is 1.12
[SubSlot 0] 12GE+12SFP+4SFP Plus Hardware Version is Ver.B
slot 1版本信息如下:
H3C Comware Platform Software
Comware Software, Version 5.20, Release 2609P55
Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C WX5540E uptime is 0 week, 0 day, 0 hour, 2 minutes
H3C WX5540E with 1 RMI XLP 432 1400MHz Processor
8192M bytes DDR3
16M bytes Flash Memory
4002M bytes CFCard Memory
Hardware Version is Ver.B
FPGA1 Hardware Version is Ver.A
FPGA2 Hardware Version is Ver.A
CPLD 1 CPLD Version is 006
CPLD 2 CPLD Version is 004
FPGA1 Logic Version is 323
FPGA2 Logic Version is 323
Basic Bootrom Version is 1.12
Extend Bootrom Version is 1.12
[Slot 0]WX5540ELSW Hardware Version is NA
[Slot 1]WX5540ERPU Hardware Version is Ver.B
==========================================================
===============display device verbose===============
==========================================================
Slot No Board Type Status Max Ports
0 WX5540ELSW Normal -
1 WX5540ERPU Normal 5
(0)
磁盘空间不足
<H3C>save ---------------------交换板模式下
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/config.cfg]
(To leave the existing filename unchanged, press the enter key): Validating file.
Please wait... Not enough disk space to save the configuration file!
Failed to save the current configuration.
Not enough disk space to save the configuration file!
表示没有足够的存储空间去保存配置文件,通过dir查看flash也提示下面的报错,设备没有格式化。
<H3C>dir
% Unformatted device
指导现场按照下面步骤操作问题解决。
1.先备份交换板的配置,可以通过记录会话保存下来
2.<H3C>fixdisk flash:用命令恢复存储空间,然后重新再测试,看是否能dir看到flash,保存配置是否正常
3.格式化交换板fomat flash ,重启sw板
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论