之前正常,有几个自动升级了,不能使用,所以拿了一个没升级的,手动 在线升级,升级完成后,可以访问密码设置界面
步骤一:开启无线终端的 Wi-Fi 功能,搜索并接入 SSID 为“H3C_xxxxxx”(xxxxxx 为设备 MAC 地址的后六位)的无线网络。在无线终端的 Web 浏览器地址栏中输入“http://myap.h3c.com”,按 键进入“密码设置”页面,设置登录密码,点击<下一步>按钮
问题就出在这里,点击 下一步 后,界面出现如下代码:
地址栏地址是:http://10.40.94.1/cgi-bin/luci/admin_guide/cfg_guide/passwd
/usr/lib/lua/luci/dispatcher.lua:469: Failed to execute call dispatcher target for entry '/admin_guide/cfg_guide/passwd'. The called action terminated with an exception: /usr/lib/lua/luci/sys.lua:809: attempt to concatenate local 'password' (a nil value) stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/dispatcher.lua:469: in function 'dispatch' /usr/lib/lua/luci/dispatcher.lua:216: in function </usr/lib/lua/luci/dispatcher.lua:215>System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing...................................
..Done!
****************************************************************************
* *
* H3C WAP712C-LI-OASIS BootWare, Version 7.20 *
* *
****************************************************************************
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd.
Compiled Date : Jun 18 2020
CPU Type : ATHEROS AR9563
CPU L1 Cache : 32KB
CPU Clock Speed : 775MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> BootWare Operation Menu |
|<0> Reboot |
============================================================================
Ctrl+Y: Change AP Mode
Enter your choice(0-4): 4
=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Update BootWare By Serial |
|<2> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-2): 2
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extended BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 4
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论