S2610写入固件教程

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTEND-ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Enter your choice(0-9): 

Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.

This document provides copyright information regarding the third-party software

that are included, either in whole or in part, in this product.

This product contains third parties component softwares and they will be used

and distributed under the specific license. This product contains some

components under the GNU General Public License ("GPL") version 2.0, the GNU

Lesser General Public License("LGPL") version 2.1 or other open source

licenses. H3C agrees to provide the open source code which is under GPL for

three (3) years from the first release date of the software. If you want to

obtain a copy of GPL licensed source code associated with this product, please

send a request to legal@h3c.com or write to New H3C Technologies Co., Ltd.

466 Changhe Road, Binjiang District, Hangzhou, Zhejiang Province 310052,

P.R. China.The product name and version number of the software, your name,

phone number and address should be included in the request. H3C reserves

the right to charge an amount of cost for distribution of source code ,

consistent with the GPL license terms. You can also obtain a copy of the GPL

Please enter q/Q to quit,other key continue....

请各位大神请指教怎么写入固件，和所需要的软件及教程谢谢