<H3C> reset saved-configuration main //清空交换机配置
The saved configuration file will be erased. Are you sure? [Y/N]:y //设备提示保存的配置将会被删除,是否继续,选择y。
Configuration file inflash: is being cleared. Please wait...
Configuration file is cleared. //配置已被清空
<H3C> reboot //重启交换机
Start to check configuration with next startup configuration file, please wait.........DONE!
Current configuration may be lost after the reboot, save current configuration? [Y/N]:n //设备提示会在重启后丢失当前配置,是否保存当前配置,选择n
This commandwill reboot the device. Continue? [Y/N]:y //设备提示设备将会重启,是否继续,选择y
Now rebooting, please wait...
(0)
命令行是不是需要登录才能使用
(0)
通过配置线连接设备的Console口或原来设备配置有远程登录如telnet或SSH
关键是console连接需要账号密码,已经忘了,设备应该是没设置过telnet和ssh连接,这种情况下怎么复位,硬件复位
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明