MSG360-4-PWR 升级失败
- 0关注
- 0收藏，112浏览
问题描述：
MSG360-4-PWR之间版本太低，内存空间不足还不能删除，在bootwaer下格式化后Update Main Image File失败，在Download Image Program To SDRAM And Run状态下可以进入系统，但重启后就又无法进系统了
这是临时进入后的设备信息，重启后是没有系统了
设备型号 MSG360-4-PWR
序列号 219801A14K9218Q00056
Boot版本 1.07
硬件版本 Ver.A
软件版本 7.1.064, Release 5272
基线版本 Release 5272
<H3C>dir
Directory of flash:
0 -rw- 169656320 Sep 13 2025 05:57:12 MSG360_4-CMW710-R5480.ipe
1 -rw- 75369472 Sep 13 2025 06:02:47 ap.bin
2 drw- - Jan 01 2011 08:00:06 apimge
3 -rw- 10205184 Sep 13 2025 06:00:56 boot.bin
4 -rw- 261472 Jan 01 2011 08:00:06 defaultfile.zip
5 drw- - Jan 01 2016 08:00:01 diagfile
6 -rw- 285 Jan 01 2016 08:28:48 ifindex.dat
7 drw- - Jan 01 2011 08:00:06 lbisp
8 drw- - Jan 01 2016 08:00:01 license
9 drw- - Jan 01 2016 08:00:01 logfile
10 drw- - Jan 01 2016 08:01:39 pdt_reserve
11 drw- - Jan 01 2016 08:01:16 pki
12 drw- - Jan 01 2016 08:00:01 seclog
13 -rw- 8764 Jan 01 2016 08:28:48 startup.cfg
14 -rw- 193795 Jan 01 2016 08:28:49 startup.mdb
15 -rw- 84073472 Sep 13 2025 06:01:54 system.bin
491520 KB total (157492 KB free)
----------------------------------------------------------
boot-loader file flash:/MSG360_4-CMW710-R5480.ipe main
Verifying the file flash:/MSG360_4-CMW710-R5480.ipe on the device.............Done.
H3C MSG360-4-PWR images in IPE:
boot.bin
system.bin
ap.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to the device.
File flash:/boot.bin already exists on the device.
File flash:/system.bin already exists on the device.
File flash:/ap.bin already exists on the device.
Overwrite the existing files? [Y/N]:y
Decompressing file boot.bin to flash:/boot.bin........Done.
Decompressing file system.bin to flash:/system.bin..........................................................Done.
Decompressing file ap.bin to flash:/ap.bin....................................................Done.
Decompression completed.
You are recommended to delete the .ipe file after you set startup software images for all slots.
Do you want to delete flash:/MSG360_4-CMW710-R5480.ipe now? [Y/N]:n
flash:/boot.bin on the device is corrupted.
flash:/system.bin on the device is corrupted.
flash:/ap.bin on the device is corrupted.
------------------------------------------------
<H3C>display boot-loader
Software images on the device:
Current software images:
Operation failed.
Main startup software images:
None
Backup startup software images:
None
用这个命令删除内存
<H3C>delete /unreserved startup.cfg The file cannot be restored. Delete flash:/startup.cfg? [Y/N]:y Deleting the file permanently will take a long time. Please wait... Deleting file flash:/startup.cfg... Done. <H3C>boot-loader file flash:/MSG360_4-CMW710-R5480.ipe main Verifying the file flash:/MSG360_4-CMW710-R5480.ipe on the device...................................Done. H3C MSG360-4-PWR images in IPE: boot.bin system.bin ap.bin This command will set the main startup software images. Continue? [Y/N]:y Add images to the device. File flash:/boot.bin already exists on the device. File flash:/system.bin already exists on the device. File flash:/ap.bin already exists on the device. Overwrite the existing files? [Y/N]:y Decompressing file boot.bin to flash:/boot.bin.......Done. Decompressing file system.bin to flash:/system.bin...............................................Done. Decompressing file ap.bin to flash:/ap.bin...........................................Done. Decompression completed. You are recommended to delete the .ipe file after you set startup software images for all slots. Do you want to delete flash:/MSG360_4-CMW710-R5480.ipe now? [Y/N]:y flash:/boot.bin on the device is corrupted. flash:/system.bin on the device is corrupted. flash:/ap.bin on the device is corrupted. <H3C>dir%Sep 13 06:54:39:177 2025 H3C NTP/5/NTP_STRATUM_CHANGE: System stratum changed from 3 to 2 after clock update. reboot Start to check configuration with next startup configuration file, please wait.........DONE! Current configuration may be lost after the reboot, save current configuration? [Y/N]:y Please input the file name(*.cfg)[flash:/startup.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait... Configuration is saved to device successfully. This command will reboot the device. Continue? [Y/N]:y Now rebooting, please wait... The specified boot file does not exist.
就挺无语的，为什么说指定de启动文件不存在
<H3C>delete /unreserved startup.cfg
The file cannot be restored. Delete flash:/startup.cfg? [Y/N]:y
Deleting the file permanently will take a long time. Please wait...
Deleting file flash:/startup.cfg... Done.
<H3C>boot-loader file flash:/MSG360_4-CMW710-R5480.ipe main
Verifying the file flash:/MSG360_4-CMW710-R5480.ipe on the device...................................Done.
H3C MSG360-4-PWR images in IPE:
boot.bin
system.bin
ap.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to the device.
File flash:/boot.bin already exists on the device.
File flash:/system.bin already exists on the device.
File flash:/ap.bin already exists on the device.
Overwrite the existing files? [Y/N]:y
Decompressing file boot.bin to flash:/boot.bin.......Done.
Decompressing file system.bin to flash:/system.bin...............................................Done.
Decompressing file ap.bin to flash:/ap.bin...........................................Done.
Decompression completed.
You are recommended to delete the .ipe file after you set startup software images for all slots.
Do you want to delete flash:/MSG360_4-CMW710-R5480.ipe now? [Y/N]:y
flash:/boot.bin on the device is corrupted.
flash:/system.bin on the device is corrupted.
flash:/ap.bin on the device is corrupted.
<H3C>dir%Sep 13 06:54:39:177 2025 H3C NTP/5/NTP_STRATUM_CHANGE: System stratum changed from 3 to 2 after clock update.
reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
Current configuration may be lost after the reboot, save current configuration? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
Validating file. Please wait...
Configuration is saved to device successfully.
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
The specified boot file does not exist.
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
<H3C>delete /unreserved startup.cfg The file cannot be restored. Delete flash:/startup.cfg? [Y/N]:y Deleting the file permanently will take a long time. Please wait... Deleting file flash:/startup.cfg... Done. <H3C>boot-loader file flash:/MSG360_4-CMW710-R5480.ipe main Verifying the file flash:/MSG360_4-CMW710-R5480.ipe on the device...................................Done. H3C MSG360-4-PWR images in IPE: boot.bin system.bin ap.bin This command will set the main startup software images. Continue? [Y/N]:y Add images to the device. File flash:/boot.bin already exists on the device. File flash:/system.bin already exists on the device. File flash:/ap.bin already exists on the device. Overwrite the existing files? [Y/N]:y Decompressing file boot.bin to flash:/boot.bin.......Done. Decompressing file system.bin to flash:/system.bin...............................................Done. Decompressing file ap.bin to flash:/ap.bin...........................................Done. Decompression completed. You are recommended to delete the .ipe file after you set startup software images for all slots. Do you want to delete flash:/MSG360_4-CMW710-R5480.ipe now? [Y/N]:y flash:/boot.bin on the device is corrupted. flash:/system.bin on the device is corrupted. flash:/ap.bin on the device is corrupted. <H3C>dir%Sep 13 06:54:39:177 2025 H3C NTP/5/NTP_STRATUM_CHANGE: System stratum changed from 3 to 2 after clock update. reboot Start to check configuration with next startup configuration file, please wait.........DONE! Current configuration may be lost after the reboot, save current configuration? [Y/N]:y Please input the file name(*.cfg)[flash:/startup.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait... Configuration is saved to device successfully. This command will reboot the device. Continue? [Y/N]:y Now rebooting, please wait... The specified boot file does not exist.