WA7322H-HI无法切换到Anchor AC模式

使用命令切换重启后仍然是fit模式，固件已更新至2622P16

https://www.h3c.com/cn/Products_And_Solution/InterConnect/Products/IP_Wlan/Products/Panel_AP/Wi_Fi_7/WA7322H_HI/#

根据产品规格介绍时是支持anchor ac模式

但是吱吱纳秒答说不支持，到底支不支持呢？如果不支持，请更正产品页面，如果支持，如何切换至anchor ac模式？

[RKNWiFi7B]ap-mode anchor-ac
Changed to anchor-ac mode successfully. The anchor-ac mode takes effect after the AP reboots.
Reboot now? [Y/N]:y
Using username "rogetnoprl".
rogetnoprl@10.216.0.2's password:

******************************************************************************
* Copyright (c) 2004-2025 New H3C Technologies Co., Ltd. All rights reserved.*
* Without the owner's prior written consent,                                 *
* no decompiling or reverse-engineering shall be allowed.                    *
******************************************************************************

<RKNWiFi7B>sys
System View: return to User View with Ctrl+Z.
[RKNWiFi7B]dis wlan dev
[RKNWiFi7B]dis wlan device r
[RKNWiFi7B]dis wlan device role
Current running mode: FIT AP.
[RKNWiFi7B]

dis version
H3C Comware Software, Version 7.1.064, Release 2622P16
Copyright (c) 2004-2025 New H3C Technologies Co., Ltd. All rights reserved.
H3C WA7322H-HI uptime is 0 weeks, 0 days, 0 hours, 2 minutes
Last reboot reason : User soft reboot

Boot image: flash:/wa7300-boot.bin
Boot image version: 7.1.064, Release 2622P16
  Compiled Dec 18 2025 20:00:00
System image: flash:/wa7300-system.bin
System image version: 7.1.064, Release 2622P16
  Compiled Dec 18 2025 20:00:00

with 1 ARM 2000MHz Processor
1024M bytes DDR4
256M bytes NandFlash Memory

Current running mode: FIT AP
Next startup mode: FIT AP
Hardware Version is Ver.B
Basic Bootrom Version is 7.04
Extend Bootrom Version is 7.07
[Subslot 0]H3C WA7322H-HI Hardware Version is Ver.B
[SLOT 1]GE1/0/1     (Hardware)Ver.B, (Driver)1.0
[SLOT 1]GE1/0/2     (Hardware)Ver.B, (Driver)1.0
[SLOT 1]GE1/0/3     (Hardware)Ver.B, (Driver)1.0
[SLOT 1]GE1/0/4     (Hardware)Ver.B, (Driver)1.0
[SLOT 1]SGE1/0/1    (Hardware)Ver.B, (Driver)1.0
[SLOT 1]RADIO1/0/1  (Hardware)Ver.B, (Driver)1.0
[SLOT 1]RADIO1/0/2  (Hardware)Ver.B, (Driver)1.0