MSR830用pppoe拨号上网，请问要怎么配置ipv6？

这个版本的固件不支持这些ipv6命令，很是无语。附上配置

[H3C]dis cur
#
version 5.20, Release 2516P24
#
sysname H3C
#
clock timezone Beijing add 08:00:00
#
password-control enable
undo password-control aging enable
undo password-control history enable
password-control length 6
password-control login-attempt 3 exceed lock-time 10
password-control password update interval 0
password-control login idle-time 0
password-control complexity user-name check
#
domain default enable system
#
dns proxy enable
#
ipv6
#
dar p2p signature-file flash:/p2p_default.mtd
#
ndp enable
#
ntdp enable
#
cluster enable
#
port-security enable
#
web idle-timeout 30
#
password-recovery enable
#
ipv6 dhcp server enable
#
vlan 1
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
dhcp server ip-pool vlan1 extended
network ip range 192.168.0.2 192.168.0.254
network mask 255.255.255.0
gateway-list 192.168.0.1
dns-list 192.168.0.1
#
user-group system
group-attribute allow-guest
#
local-user admin
authorization-attribute level 3
service-type lan-access
service-type ssh telnet terminal
service-type web
#
cwmp
undo cwmp enable
#
ipv6 dhcp pool 6
#
interface Cellular0/0
async mode protocol
link-protocol ppp
tcp mss 1024
#
interface Dialer10
nat outbound
ipv6 address auto
ipv6 address auto link-local
link-protocol ppp
ppp chap user  077777777777
ppp chap password cipher $c$3$bWvyeUdRf+w+
ppp pap local-user 077777777777 password cipher $c$3$JBVMOAj81nZnUD46
ppp ipcp dns admit-any
ppp ipcp dns request
mtu 1492
ip address ppp-negotiate
tcp mss 1024
dialer user username
dialer-group 10
dialer bundle 10
#
interface NULL0
#
interface Vlan-interface1
ipv6 nd autoconfig managed-address-flag
ipv6 nd autoconfig other-flag
ipv6 address auto
ip address 192.168.0.1 255.255.255.0
tcp mss 1024
dhcp server apply ip-pool vlan1
ipv6 dhcp server apply pool 6
#
interface GigabitEthernet0/0
port link-mode route
nat outbound
pppoe-client dial-bundle-number 10
ipv6 address auto
ipv6 address auto link-local
#
interface GigabitEthernet0/4
port link-mode route
tcp mss 1024
#
interface GigabitEthernet0/1
port link-mode bridge
#
interface GigabitEthernet0/2
port link-mode bridge
#
interface GigabitEthernet0/3
port link-mode bridge
#
ip route-static 0.0.0.0 0.0.0.0 Dialer10
#
dhcp enable
#
ntp-service unicast-server 120.25.115.20
ntp-service unicast-server 139.199.214.202
#
ssh server enable
#
dialer-rule 10 ip permit
#
nms primary monitor-interface Dialer10
#
load xml-configuration
#
load tr069-configuration
#
user-interface con 0
user-interface tty 13
user-interface vty 0 4
authentication-mode scheme
#
return

方案一：标准 PPPoE 拨号获取 IPv6（建议优先尝试）

• 如果能查看到类似 240e:xxxx:xxxx::/56 或 /60 这样的前缀信息，说明运营商下发了 PD，内网终端此时应该能获取到 IPv6 地址并正常上网。
• 如果没有任何前缀信息，说明运营商确实没有给你分配前缀，此时请采用方案二。

方案二：无 PD 前缀时的 NAT66 转换方案