排查步骤及命令:
1. 确认设备模式:登录UR路由器,执行display device mode查看是否为自组网模式(如“mesh”)。
2. 退出自组网模式:执行undo mesh enable(需进入系统视图),保存配置save。
3. 重启设备:执行reboot,重启后检查AP是否可见。
4. 若仍异常,恢复出厂设置:执行reset saved-configuration,确认后重启,重新配置网络。
关键命令:
查看模式:display device mode
退出自组网:system-view → undo mesh enable
保存配置:save
重启:reboot
恢复出厂:reset saved-configuration
暂无评论